I have a quick question or two:
I recently installed a Toytec ULK and add-a-leaf to a 2013, 4wd (TRD OR), double cab, short bed. However, I forgot to take measurements before I got started. I am wondering what the measurements from hub to center is for a stock truck like mine, and what the measurements should be after the lift is installed. I adjusted the front to be similar to the rear measurements, but feel like I may have raised it too far (collar is approximately in the middle of threads) because the ride seems very stiff. Example: when going over a speed bump slowly the front suspension seems to really slam hard on the other side. Any help would be appreciated. I installed the shims in the rear, sway bar relocator, and differential drop. I searched the forum for measurements and found some results, but kind of wanted to explain my whole situation.