Pro Comp with 35's

Cut the plastic fenders back. Bang the metal out of the way....REPEAT! It's just that easy.

 

But why is my front end lower than my back end? Why is that other taco sitting a few more inches higher than mine in the front? If I can get the front level with the back, I won't have to cut or pound on anything... but I need to know what I need to evem it out to match the back.

 

Send me the truck and I will fix it for you after I take it off road for a bit, I will send you the bill later.

 

Adjustable shocks/springs.

 

Isn't that what a coilover is? Shock and spring which is adjustable?

 

Any others out there want to give some input? I wanted the icon coilovers did the procomp, but week this level up the front end?

 

These guys:
http://www.offroadpowerproducts.com...ble-coil-over-shock-2005-11-tacoma-58631.aspx

 

i got the same lift.... only i built mine to a stage III... urs is a stage I. it will take trimming, chopping some of the frame (bodymount). definitely new coilovers. i only rub a little when i offroad and its only on tight turns and im at about 9 inches of lift now all suspension


my setup is running 35"x12.1/2"x18s nitto mud grapplers. 7" leaf pack in the back and procomp mx6 adjustable coilovers maxed in the front

 

Self clearancing for the win!