Stock TRD struts good for 1.5" AAL ?

I have 1" blocks now , kind of want alittle rake back. And I hate how much the truck squats if anythings in the bed since it sits almost level empty .

My rear struts are brand new, Id like to keep them if possible. They ok for a 1.5" lift or is that pushing it ?

truck is a 2013 TRD sport 4x4 LB.

My current leaf has a total of 4 if you count the fat short bottom one.

 

i have 1 1/4 blocks on my 2012 4 leaf and topping out on harsh bumps became an issue so u might b on the cusp of having some trouble

 

^ do the 1.25" blocks have a taper?

Ive only seen 1 and 1.5" blocks

 

no they dont

 

Just to update, I took some measurements from the wheel well to the center of the hub with the AAL installed and rear end floating in the air , then with the struts bolted and the truck sitting on the ground .

The struts have about 2" of down travel left in them.

So they should be fine for normal driving until I upgrade.

Figured Id share in case any one every had the same question.

 

Thanks OP! I had the same question.

 

Yes you can get the 1.25 blocks tapered.


http://www.truckspring.com/products...h-Rear-Lift--Tuff-Country-97078__TC97078.aspx


http://www.suspensionconnection.com/cgi-bin/suscon/97078-tacoma-block-kit.html


http://www.**************.com/index.php?main_page=product_info&products_id=7858