4" camburg spindles installed (pics)

FML...

 

You can do the install yourself like I did. The hardest thing is bleeding the brakes cuz you need help. Make sure you have plenty of time cuz the install does take a while.

 

When I got my spindles & extended brakelines installed I only payed $250 and I got an alignment with it for that price. He quoted me that it would take 3 hours, but I might have gotten a good deal because I was getting the same thing done to my brother's truck.

Truck looks awesome 06bluez. Do you think the deavers will provide enough lift in the rear to somewhat match up to the front? I want to get them but I'm worried they might settle too much.

 

I dont think the Deavers will even it out but it would be close. I havent had a chance to call them yet. I want to drop my lift to like 4.5" though 6" is to high.

 

Ya I dropped mine down. I'm closer to 4.5-5'' now. It rides much better and my CV's look good

 

Pics Blkt!

 

So if you only wanted 4" of front lift with a bone stock taco could you just add the spindles and leave everything up front alone? Then do like an aal and 1" block in back or whatever to level it out?

 

You could ya but you'll mostly likely atleast need new UCAs and shocks if you lift the rear as well.

 

ok. Because i was thinkin about getting some spindles but i only want like 4 or 5 inches of lift. But i have the OME setup so I cant adjust stuff. Do they make like 2 or 3" spindles?

 

You don't have to get new UCA when you get the spindles because it keeps the stock geometry supposedly.

I think the TC's spindles are 3.5'' otherwise your only other choice would be Camburgs 4'' ones

 

TC Spindles are $300 more!!

Keep your stock shocks and install the spindles and you will have a 4" lift.

 

Ok. Yea i was tols earlier that with spindles, no new uca's are necessary

 

The first thing that comes to me is Tough looking.

 

Here is what the spindles look like.

Here they are compared, the big ones are the camburgs (obviously).

 

Yea i noticed how rinky dink the stock ones were when i was installing my lift. I was like wtf! They dont seem that strong.

 

If I was keeping my prerunner, I'd be running camburg spindles...

awesome..

 

WOW... what a comparison!

 

yea no kidding, the stock ones look like garbage in comparison

 

can you use the ome coils ands spindles together? how would the ride be like if that is possible?

 

You can... ride should be as if you were running stock spindles... they shouldn't affect ride quality at all.