What is the best way to get 1.25 inches of lift in the front

I would like to get between 1-1.25 inches of lift in the front without causing a harsher ride or cause any vibrations. I'm hoping there is a way to get exactly 1.25. I wanted to get bilsteins but there is no I between for the .85 or 1.75 settings. Is there are way I could get the lift I want with still getting bilsteins. I have an 06 4x4 and I don't want it to be hard on the differential or the cv boots or joints. Also I still want to be able to align it properly. I have stock 3 leaf and want it to sit level. Any recommendations?

 

Icon, fox or king coilovers are your best options.

 

Would setting the bilsteins on .85 and adding a .25 spacer be bad? Are there any downfalls of spacers?

 

What are your driving conditions or what are you using the truck for? DD mainly? High speed desert? Crawling? Or touring around fire roads?

This is helpful info.

 

DD mainly. Occasional off-roading...just to get to hunting or fishing spots, nothing extreme at all.

 

Any other suggestions? The icon, fox, or king coil overs are nice but to expensive

 

OME 883

 

Is it bad to use the ome coils with the stock strut?

 

Any other suggestions? I would like to be getting something soon

 

Are ome 883s fine to use with the second gen stock shocks? Also where do you buy these from?