Toytec spanner wrench size?

i have managed to bend the cheap spanner wrenches that toytec includes with the C/O. can someone give me the size of each so I can order some more substantial ones online somewhere?
thanks

 

just emailed toytec to see if they can give me the specs on the wrenches so i can order new ones asap. After helping a friend install the SAW today and experiencing the ease of use of the included spanner I decided that i was even more unhappy with my inadequate wrenches.
anyway - i'll let you guys know in case anyone actually cares!

 

I bent mine also! but I just bent it back straight, and tryed not to bend it again.

 

I also tried not to bend mine again, but given that I have to use a piece of pipe to get some leverage - the wrench doesn't stay straight. Anyway- so do you know the size?

 

true that

subscribed..

 

Toytec should send you another.

 

that would be awesome but i don't mind paying for a decent one. If they sent another it might not bend as I have sprayed everything down with chain lube and it turns easier now.
I would like on that had the "pin" rather than a "hook" - if you have seen them you know what i mean. They c/o is made for a "pin"

 

I ordered two Adjustable Hook Spanner wrenches from McMaster.com. The pins were too big, but I just ground the ends and the pins down until they fit. I got the 5471A13 for the bottom and the 5471A14 for the top.
http://www.mcmaster.com/#5471a13/=1kd58p