1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

1st Gen PreRunner - Adjust Front Suspension

Discussion in 'Suspension' started by odellkevin, Dec 3, 2014.

  1. Dec 3, 2014 at 9:32 AM
    #1
    odellkevin

    odellkevin [OP] Member

    Joined:
    Aug 22, 2014
    Member:
    #136747
    Messages:
    9
    Gender:
    Male
    Navarre, FL
    Vehicle:
    98 PreRunner Xtra Cab V6 TRD
    Okay, I've searched/read about 100 posts and can't find the answer, so I'll ask. I've got a '98 PreRunner, V-6 AT, anyway, the right front end sits about a 1/2" lower than the left. The rear end is level from left to right (as measured from the ground to the fender trim). The front I measured the same way and the right side is about a 1/2" lower, I also checked between the LCA and the bump stops, and the gap on the right is about 1/2" lower. Is there any type of adjustment to level it out? I remember on front ends with torsion bars, you could tweak the height easily, but I'm not too familiar with IFS coils.
     

Products Discussed in

To Top