Coil over with top plate spacer

Hey guys I can't find anything on this topic so here i am asking.

I want to achieve 4" of front end lift. I already have 3" coil overs, is it possible to add a 3/4" top plate spacer (not coil spring spacer) to give me the added clearance for my tires or will these not work together? thanks.

 

I am 4x4. I wanted to add a 4'' lift from either BDS or Zone and use the coiler top plate combo with their kit instead of the 4" spacer things they give with the kit. I think the control arms would be ok with all the drop brackets in the kit. any thoughts

 

anoyone have any feed back on the RCD lift at 4.5"

 

reviving an old thread with probably a silly question/request but I'm looking at coilovers that will give me a 3" lift along with rear leafs so it will be all level. problem is I want the front a little higher and little I mean half inch max so could I run a half inch spacer on top of my coilover or is that just plain silly? haha I will have aftermarket uca also. maybe it will be less silly to go with a one inch block in rear instead of one and half inch leaf and no spacer in front?

 

If you are 2wd then go with spindles, don't do a spacer on top of an aftermarket cool over. If you are 4wd then I'm not sure how to help there

 

wont that be too high, spindle with coilover? I just want 3.5" max

 

The spindle will give you around 3.5, that's what i ended up with them I have my coilover set at 0

 

Remember that the rear end sits higher so you have to compensate with the ad a leaf, you will be adding 1.5 inches to the rear but you will need around 3.5 to 4 to get level or the front end higher

 

This is with the ad a leaf and spindles, the shell has mad the rear sag about an inch, I was about level before

 

I know... that's the problem. hahahaa. 4" spindle lift seems too high and also my coilovers will put it way too high even the coilovers are set to 0 lift

 

Could I remove a leaf from factory and then add my icon progressive leaf pack making it a little less than a 1.5" lift in the rear?