3" lift suggestions

Looking to put a 3" lift on my 2014 trd sport Tacoma. Heard and read many things about which lift to get. What do you all think? I do little off-roading so I'm looking for a smooth ride but want to be able to off road occasionally.

 

We have a few different options to maximize your ride and off road capabilities. Feel free to give me a call and im sure we can find something you would be more than happy with.
- Landen

 

I'm looking at doing an OME setup but also waiting to see what people say about the new Bilstein 6112s.

 

What's the number to call ? Also looking to lift my Tacoma

 

406-961-0126

 

I had All-Pro standard 3" leaf springs when I had my Tacoma and the ride was absolutely amazing.... Definitely the best money spent when I lifted my truck.

 

Fan of OME:

 

Bilstein 5100s with OME 887 coils and either a new leaf pack or an AAL in the rear. That's a quality lift that rides smooth, is offroad capable, and won't break the bank. Also probably should get some Light Racing UCAs so you can get a proper alignment after it's all said and done.

 

Good word of advice, I have a question I'm new to Tacomas and lift kits for them, how about the spindle replacement, I been reading on maxtrac, what's the word ?
Or just the coils and leaf on the rear with new shocks do I need UCA's with the spindle or just the UCA's and no spindle .

 

Spindles are typically used on 2WD

 

Nice truck, is your a 14 or 15, I have the 14 I like the light bar on the bottom what size is the light bar? Thank you

 

Spindle lifts are primarily used on prerunners, not 4x4. Sometimes new UCA's are required with 3" or more of lift.

 

My is a 2WD I don't know I will used the 4x4 . To late now

 

I have the prerunner TRD.

I have the prerunner TRD, would that change the way I lift my truck or what I need?

 

What height are you looking to achieve? A spindle lift will provide 4" of lift. If you're wanting to keep it under 3", I would suggest some OME or Eibach coils.

 

I have a 13 and the bar is 30"

 

I will like to run 33's with 17" wheels if possible. What's my best direction. I also read about 33' And how heavy they are?

 

Do you care about trimming and chopping etc? If not stick with 265s

 

I like the lift on your truck, what size lift is that? And tires

 

Full OME 3" lift with Dakars out back running 285/75/16s with plenty of trimming and flattening of steel to stuff those rubbers