ICON going on!

Just installed my Icon setup yesterday and I agree with your observations. Truck feels rock solid, no more rocking back and forth on bumps, even the steering feels a bit stiffer (Solid) in a good way. Slightly stiffer on pavement but it is fricken awesome off pavement.

I am running Dakar Leafs and Light Racing UCAs

Enjoy, your truck looks great!

 

Thanks, enjoy yours as well!!

 

So with that combo you raised front abit correct? Some folks have stated they had to extend the drivers side to near limits to avoid taco lean and get perfect level, was this also your experience?

 

That is correct, I raised the passenger side 1/2" and close to 1" on the drivers side. I have 1" 3/4 thread showing on the drivers side and 1" 1/2" on passenger side. The recommended is 2". There is not a noticeable difference in ride quality from before and after the adjustment just the truck now sits level left to right and front to back.

 

Great suspension. You should live it.

 

Is the picture of your camburgs at ride height? It looks like the ball joints are at an angle? Just wondering how they will fit on my truck. I ordered a set that will be delivered Thursday.

 

How do you like the dakars?? im running the Icon AAL and it is nice but I think its starting to sag a little...

 

No those are while the truck was still on the jackstands. the picture of the side of the truck shows where they are actually sitting. I can take a pic of it closer with the tires on the ground if you wanted to see the angle of the ball joints.

 

That would be great!

 

Holy shit your stoked...

 

No worries, here you go.

 

YES I AM!!!!

 

I don't have tons of seat time with them but so far so good. I was worried because I read a lot of complaints they were pretty rough which has not been my experience. I have a All Pro Pack Rack with a RTT so I have a bit of weight back there which is probably helping.

 

Looks good man, wheels and tires like you said will be that final touch!

 

Well I may have to look that way...Maybe remove a leaf.. Thanks for the feedback

 

Could I get a picture of the front driveline angle? How much total lift did you get in the front at our current settings?

Thanks, your truck looks awesome!

 

Thanks! I will get a pic of the front driveline angle. I have 2 1/2" on passenger side and a little more than 2 3/4 on driver side to level her out.

 

LOL, I will eventually. Baby steps.

 

Isn't that an unsafe thing to do? In case you have to stop real fast and hard? And I think if your insurance company found out you did that and it possibly contributed to the accident being worse you could get really screwed. And why would you need to take it off in the first place? Benefits?

 

Nice setup---nearly identical to what I am going to be running.

So far very happy with the Camburg BJ UCA's and the Icon Ext-Travel coil overs w/resi.

Can't wait to finish the rear on mine and get her aligned.

Jordan