Billy's @ 1.75" & 1" rear lift??

Anyone have this setup? Far as rear goes either a 1" block or a AAL of equal. Post pics if you got it. Preferably on a double cab so I can see idea of how it sits. Thanks

 

1st or 2nd gen?

 

2nd gen, please.

 

I have a ton in my gallery from when I had bilsteins at 1.75 with stock springs and a 1'' block in the rear. Here are a few:

 

Thanks man it looks good! Those 265/75/16 on it then too? Also did you have any vibes issues with it?

 

Yep - 265/75/16! And nope, no vibes (from what I remember; I didn't run the set up for very long).

 

i have that set-up with 1" blocks in the back and have had zero issues in 40,000 kms so far. no vibes or anything and alignment wasn't a problem with stock uca's.

sorry i have no pics since i'm at work but here is my build page.

http://www.tacomaworld.com/forum/2nd-gen-builds/243787-jermoids-2012-white-dbcb-build.html

 

On my 2010. No issues ran and drove great.

 

I don't have my Bilsteins at 1.75, but I do have OME 884 coils on Bilstein's at the stock/0 setting. Gave me about 2" of lift, maybe sagged to just a bit under so it's around the same front height as yours. I went with a 1.5" AAL as well in the rear, it did sag some more than the front. I am running 265/75-16 Duratracs.

 

I also have OME 884s on 5100s in the front, so 2" instead of 1.75...at least initially, may have settled a bit but haven't checked in a while.

I'm not sure what the rear is anymore. Probably also slightly higher than what you're looking for. General HD leaf packs and 5100s in the rear.

These are winter wheels/tires--245s on 16" TRD Off Road wheels. Summers are stock size on 17" stock sport wheels, so they are very slightly larger.

 

I just put 5100s all the way around with the front set at 0.85", OME 885 coils and a Toytech AAL in the rear. It lifted it a lot more than I was expecting, but I like it. No vibrations &/or issues yet, but I do need bigger tires.

 

Pre loading your billy's at 1.75 with OME 885's is going to lead to problems down the road. the OME's are lift coils and you shouldn't preload your billys with them.