Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Garage > Suspension

Notices

camburg spindles and billy 5100s??

Reply
 
Thread Tools Search this Thread
Old 11-16-2009, 05:45 PM   #1
dabighi [OP] dabighi is offline
Senior Member
dabighi has a little shameless behaviour in the past
Joined: Oct 2007, #2978
Posts: 170
dabighi's Tacoma Gallery
camburg spindles and billy 5100s??

first of all im sure that there is a thread out there similar to what im about to write and i just want to start off saying sorry. havent been on here in a while or been up on things. anyways with that said...im currently running the procomp 3" strut lift with aal's and pro comp rear shocks. over all not a bad kit for daily driving and stuff i must admit. but overtime the front is actually a little lower than the rear and yes i am from so cal and like the so cal (baja) lean. if i run the camburg spindles with the bilstein 5100's up front what coils will i need to get? also is it true that spindles will provide for a smoother ride??? again thanks alot for any input and help..
  Reply With Quote
Old 11-17-2009, 10:22 AM   #2
dabighi [OP] dabighi is offline
Senior Member
dabighi has a little shameless behaviour in the past
Joined: Oct 2007, #2978
Posts: 170
dabighi's Tacoma Gallery
????? Come on I know you guys have an answer
  Reply With Quote
Old 11-17-2009, 10:25 AM   #3
Senior Member
06Bluez has much to be proud of06Bluez has much to be proud of06Bluez has much to be proud of06Bluez has much to be proud of06Bluez has much to be proud of06Bluez has much to be proud of06Bluez has much to be proud of06Bluez has much to be proud of06Bluez has much to be proud of06Bluez has much to be proud of
 
06Bluez's Avatar
Joined: Jun 2008, #7281
Location: Phoenix, Arizona
Gender: Male
Posts: 956
06Bluez's Tacoma Gallery
You can run the stock coils. And yes it will be a smoother ride because your LCA's wont be at an extreme angle.
  Reply With Quote
Old 11-17-2009, 10:25 AM   #4
Senior Member
Its_Taco_Time is one of the sharper tools in the shedIts_Taco_Time is one of the sharper tools in the shedIts_Taco_Time is one of the sharper tools in the shedIts_Taco_Time is one of the sharper tools in the shedIts_Taco_Time is one of the sharper tools in the shedIts_Taco_Time is one of the sharper tools in the shedIts_Taco_Time is one of the sharper tools in the shedIts_Taco_Time is one of the sharper tools in the shedIts_Taco_Time is one of the sharper tools in the shedIts_Taco_Time is one of the sharper tools in the shedIts_Taco_Time is one of the sharper tools in the shed
Name: Chris
Joined: Sep 2009, #22800
Location: Yorba Linda
Age: 29
Gender: Male
Posts: 901
Its_Taco_Time's Tacoma Gallery
Quote:
Originally Posted by dabighi View Post
????? Come on I know you guys have an answer
The spindles, 5100s and brake line extenders for the front. Should need any sway bar relocators or anything. What setting are you going to put the billys on? It will be smoother yes, assuming you keep the bilsteins on 1.75 or below.
  Reply With Quote
Old 11-17-2009, 10:30 AM   #5
Mod'n on a Budget
1BlkT is one of the sharper tools in the shed1BlkT is one of the sharper tools in the shed1BlkT is one of the sharper tools in the shed1BlkT is one of the sharper tools in the shed1BlkT is one of the sharper tools in the shed1BlkT is one of the sharper tools in the shed1BlkT is one of the sharper tools in the shed1BlkT is one of the sharper tools in the shed1BlkT is one of the sharper tools in the shed1BlkT is one of the sharper tools in the shed1BlkT is one of the sharper tools in the shed
 
1BlkT's Avatar
Name: Ty
Joined: Oct 2007, #3283
Location: 90603
Age: 29
Gender: Male
Posts: 1,289
1BlkT's Tacoma Gallery
Spindles don't change the "smoothness" of the ride. They just provide you with lift that way you don't need to preload your coilovers or bilsteins.

Get the Camburg Spindles and run the Bilstein 5100s at whatever height you want. I'd stay below the 2.5'' setting on the Bilstein that way you don't have to worry about your alignment and can avoid buying new upper control arms. It will also ride smoother the lower the setting on the Bilstein

You will need to purchase extended brakelines for the front as well.
  Reply With Quote
Old 11-17-2009, 10:34 AM   #6
dabighi [OP] dabighi is offline
Senior Member
dabighi has a little shameless behaviour in the past
Joined: Oct 2007, #2978
Posts: 170
dabighi's Tacoma Gallery
Don't have the coils anymore.probably set the shocks at an inch no more than 1.75.already have the sway bar relocation bracket on there
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
billy 5100s taco man31 Suspension 16 09-07-2014 11:16 AM
Camburg Spindles hudhawk 2nd Gen. Tacomas 38 09-08-2011 09:37 AM
Billy 5100s mclapperton 2nd Gen. Tacomas 13 06-26-2010 07:08 PM
Can i use camburg spindles with billstein 5100s and stock coils eddieEndo 2nd Gen. Tacomas 2 11-23-2009 10:01 AM
Billy 5100s AK27 2nd Gen. Tacomas 4 02-01-2009 05:51 PM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.