3-inch Toytec suspension lift for 2007 Tacoma Access Cab

[white2007tacoma]

I have been debating on installing the 3-inch Toytec lift on my '07 Tacoma. However, I have a few hang-ups now since reading some stories on this forum. I would really appreciate some comments from those of you that 1) have a new generation (05-08) Tacoma and 2) have a 3-inch Toytec lift. I would just like to know if you have experienced any problems with your Tacoma since you have installed this lift, had any issues with a voided warranty, and/or things you would do differently/learned since you have had this on your Tacoma. In advance, thank you for your help!

[Toycoma06]

I went with the 3'' Toytec OME 884's with the 1.5 block kit. I'm very happy with the lift, went on easy and had no issues. So far i have not had any vibration issues or any problems. Just in case you are wondering about the block in the rear, i have had the suspension TSB done.Hope this info helps, good luck on your lift!!!!

[luk8272]

Not trying to steal the thread just wondering a few things. I was wanting to put a 3" lift on my 07. I am planning on making my own blocks for the rear and purchasing a ProComp 3" for the front. How tall of a block needs to be in the rear if I buy the 3" lift for the front. I would like the truck to be as level as possible. Also will this require getting longer brake lines or any such modifications? My truck will be seeing some trails out in Texas, so there will be some articulation but nothing real crazy.