1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Clunk front driver side disc after lift and uca's

Discussion in 'Suspension' started by EmoSlayer, Dec 16, 2009.

  1. Dec 16, 2009 at 4:04 PM
    #1
    EmoSlayer

    EmoSlayer [OP] METAL!

    Joined:
    Aug 16, 2009
    Member:
    #21271
    Messages:
    166
    Gender:
    Male
    First Name:
    Scott
    PA
    Vehicle:
    TRD Off-Road
    Bilstein 5100s all 4 corners, front set at 0.85 w/ eibach coils metalcast red, driver's side lean spacer, rear tsb leaf pack with tsb aal from toytec, 265/75/16 goodyear wrangler authority, MT Classic III 16x8 4.5bs, LR UCAs
    Hi all,

    I just installed 3" OME lift with top plate spacers along with the LR UCA's. After a week or so driving a clunk has been coming from the front driver's side brake disc area... It happens when when accelerating from a stop after having just braked or going over bumps where the front suspension flexes. Once in a while it will happen going around 15mph and it kind of sounds like i just ran over a metal grate in the street, but its the truck. It sounds like metal popping if that makes any sense. Anyone else having issues like this, any help would be greatly appreciated.

    O yea one more thing, those plastic tab mechanisms that hold the front flares on, how can I replace these? I flexed the front tire and it popped the front flare off a little bit, breaking some of these plastic tabs.
     
  2. Dec 16, 2009 at 4:12 PM
    #2
    Brunes

    Brunes abides.

    Joined:
    May 31, 2008
    Member:
    #7011
    Messages:
    17,562
    Gender:
    Male
    First Name:
    Rotorhead
    Around
    Vehicle:
    08 Red/Graphite and Satin Black
    Inside: Tint, Wet Okole 1/2 Piped Red/Black Covers, Black Weathertech Digital Fit Mats, URD Short Throw w/ TWM Weighted Knob, USA Spec iPod adapter. Outside: 4300K Retro w/ Angel Eyes and Red Shrouds, 5000K Blazer Fog Light Retrofit, Debadge, Bed Locking Handle, Satin Black Rims Performance: TRD/Steigmeier Blower w/ 2.7 Pulley. 668 Injectors and 320 LPH AEM Fuel pump. URD UCON and 7th Injector. DTLT Headers, URD Y-Pipe, Wicked Flow Muffler. Suspension: Both: OME Shocks Front: 886X's and TC UCAs Rear: Dakars Armor: Relentless Front Bumper Relentless High Clearance Rear w/ Tire/Rotopax Swing Out Relentless Front, Mid, and TCase skids BAMF Diff Skid Recovery and Spares: Fullsize Spare Tire 2x2 gal Rotopax 1x1 gal Rotopax 1x1 gal Water Rotopax Warn 9.5XP-S Winch Hi-Lift Extreme 60" Ironman Off-Road Recovery Kit
    Did you do the install?? I'd go back thru and make sure you have all the bolts tightened up again...Double check the sway bar and skid plates.

    The tabs- I've check with the dealer or a junk yard....
     
  3. Dec 16, 2009 at 4:15 PM
    #3
    EmoSlayer

    EmoSlayer [OP] METAL!

    Joined:
    Aug 16, 2009
    Member:
    #21271
    Messages:
    166
    Gender:
    Male
    First Name:
    Scott
    PA
    Vehicle:
    TRD Off-Road
    Bilstein 5100s all 4 corners, front set at 0.85 w/ eibach coils metalcast red, driver's side lean spacer, rear tsb leaf pack with tsb aal from toytec, 265/75/16 goodyear wrangler authority, MT Classic III 16x8 4.5bs, LR UCAs
    dealer wanted $400!!!! could it have anything to do with the new rims and the existing brakes...?
     
  4. Dec 16, 2009 at 4:20 PM
    #4
    Brunes

    Brunes abides.

    Joined:
    May 31, 2008
    Member:
    #7011
    Messages:
    17,562
    Gender:
    Male
    First Name:
    Rotorhead
    Around
    Vehicle:
    08 Red/Graphite and Satin Black
    Inside: Tint, Wet Okole 1/2 Piped Red/Black Covers, Black Weathertech Digital Fit Mats, URD Short Throw w/ TWM Weighted Knob, USA Spec iPod adapter. Outside: 4300K Retro w/ Angel Eyes and Red Shrouds, 5000K Blazer Fog Light Retrofit, Debadge, Bed Locking Handle, Satin Black Rims Performance: TRD/Steigmeier Blower w/ 2.7 Pulley. 668 Injectors and 320 LPH AEM Fuel pump. URD UCON and 7th Injector. DTLT Headers, URD Y-Pipe, Wicked Flow Muffler. Suspension: Both: OME Shocks Front: 886X's and TC UCAs Rear: Dakars Armor: Relentless Front Bumper Relentless High Clearance Rear w/ Tire/Rotopax Swing Out Relentless Front, Mid, and TCase skids BAMF Diff Skid Recovery and Spares: Fullsize Spare Tire 2x2 gal Rotopax 1x1 gal Rotopax 1x1 gal Water Rotopax Warn 9.5XP-S Winch Hi-Lift Extreme 60" Ironman Off-Road Recovery Kit
    At they touching while sitting still?? or is there some sort of weld bead or anything??
     
  5. Dec 16, 2009 at 4:27 PM
    #5
    EmoSlayer

    EmoSlayer [OP] METAL!

    Joined:
    Aug 16, 2009
    Member:
    #21271
    Messages:
    166
    Gender:
    Male
    First Name:
    Scott
    PA
    Vehicle:
    TRD Off-Road
    Bilstein 5100s all 4 corners, front set at 0.85 w/ eibach coils metalcast red, driver's side lean spacer, rear tsb leaf pack with tsb aal from toytec, 265/75/16 goodyear wrangler authority, MT Classic III 16x8 4.5bs, LR UCAs
    mms_picture-2_f4c03da7fd03fb2813fe5793eb503db47cde8d76.jpg


    here is a photo, i can get more if needed
     
  6. Dec 17, 2009 at 2:59 PM
    #6
    EmoSlayer

    EmoSlayer [OP] METAL!

    Joined:
    Aug 16, 2009
    Member:
    #21271
    Messages:
    166
    Gender:
    Male
    First Name:
    Scott
    PA
    Vehicle:
    TRD Off-Road
    Bilstein 5100s all 4 corners, front set at 0.85 w/ eibach coils metalcast red, driver's side lean spacer, rear tsb leaf pack with tsb aal from toytec, 265/75/16 goodyear wrangler authority, MT Classic III 16x8 4.5bs, LR UCAs
    the bolt holding the uca on was loose, tightened that up and fixed the issues, thanks for the help
     
  7. Dec 17, 2009 at 5:55 PM
    #7
    Brunes

    Brunes abides.

    Joined:
    May 31, 2008
    Member:
    #7011
    Messages:
    17,562
    Gender:
    Male
    First Name:
    Rotorhead
    Around
    Vehicle:
    08 Red/Graphite and Satin Black
    Inside: Tint, Wet Okole 1/2 Piped Red/Black Covers, Black Weathertech Digital Fit Mats, URD Short Throw w/ TWM Weighted Knob, USA Spec iPod adapter. Outside: 4300K Retro w/ Angel Eyes and Red Shrouds, 5000K Blazer Fog Light Retrofit, Debadge, Bed Locking Handle, Satin Black Rims Performance: TRD/Steigmeier Blower w/ 2.7 Pulley. 668 Injectors and 320 LPH AEM Fuel pump. URD UCON and 7th Injector. DTLT Headers, URD Y-Pipe, Wicked Flow Muffler. Suspension: Both: OME Shocks Front: 886X's and TC UCAs Rear: Dakars Armor: Relentless Front Bumper Relentless High Clearance Rear w/ Tire/Rotopax Swing Out Relentless Front, Mid, and TCase skids BAMF Diff Skid Recovery and Spares: Fullsize Spare Tire 2x2 gal Rotopax 1x1 gal Rotopax 1x1 gal Water Rotopax Warn 9.5XP-S Winch Hi-Lift Extreme 60" Ironman Off-Road Recovery Kit
    That's what I figured. Glad you got it liked!!
     

Products Discussed in

To Top