King Coilovers Tacoma Gen 1

Good Morning,

I have been getting a few questions lately about the King coilovers for the Gen 1 Tacoma's...1995.5 to 2004 4wd and 2wd (6 Lug)
I have just posted a picture in the news section of the DSM Site:

http://downsouthmotorsports.com/news.html



This is our 1996 Tacoma 4x4 with a 4 cly. and I drive it daily as our work vehicle.Here is a list of the mods.

King Coilovers Front set at the factory setting from King and it is about 2.25" -2.50" of ride height change.

Rear 5125 Series Bilsteins 8" and 8.5" Travel with the correct bushings installed and bolted into the stock locations..No lift in the rear...She is stock..

Tires & Wheels: Factory 15 x 7 Tacoma wheels powder coated Asphalt Black and caps painted to match. Tires are BFG AT's 33 x 10.50 x 15
and no Rubbing....

Hope this helps and here is the link to the coilovers on our site for the techy stuff:

http://downsouthmotorsports.com/i-1...96-2004-toyota-tacoma-4wd-2wd-pre-runner.html

And of course forum members will need to contact us for discounts...

Enjoy the rest of your weekend...
Thank you,
Sonny