Eibach Springs?????

I have a set of the eibach springs on a set of 5100's at .85 is this to much preload for the springs?????

 

From what I've read, "0" or ".85" on the 5100's works fine with the Eibachs. I've got mine set at 0 with no issues.

 

should be fine at .85 from what i've heard.

 

I'd love to see pics as well since I'm either going to do 0 or .85 with my eibachs. Billy's arrive tomorrow

 

Had that set up on my 09 prerunner 4 door 2wd and a 2" AAL.

Little darty on the hiway due to the caster with the stock UCAs.

 

Those of you running at .85, any issues with alignment/vibrations? What was your total lift after they settled?

 

how about 1.75, have some courage

 

My little home made spring compressor would not like squeezing them that much!!

That would be a bunch of preload.

 

Any information with the .85 settings on the bilstein and eibach's installed?

 

What type of information are you looking for? There is a lot of info about 5100's set at .85 and Eibach coils on this site. They'll provide about 2.5" of lift on a double cab 4wd but will also give a relatively stiff ride.

 

I have a 4 door 4x4 and would like to know the normal ride height would with the 5100's at .85 and the eibach springs. Would this work good with 33's? Should I move to 1.75 with the eibach springs? Are there any issues I should be aware of?