Is my alignment ok?

i had the same problem with the squeeking after my alignment. it turned out to be the sway bar rubbing the strut at the bottom of the coil..

 

^^Thanks man imma go check that!

 

Sounds like its only on the driver side front? It squeaks just from me getting in and out of the truck?

 

yup. just like mine. only on the driver side. it bugged the crap out of me!! i put a spacer between the sway bar bracket and the frame and the sqeakin went away..

 

Is my rear alignment ok?

 

That thrust angle is a little high- but it's kind of a pain in the ass to adjust unless you have an alignment rack you can get on and work on your rig on. And I don't think it'll do any major damage if you don't work it out.

 

ok thanks, i didnt know if that would make my tires wear unevenly?

 

Ok guys im going back in the shop for another alignment on friday. So should i ask them to set my camber at 0 and hopefully that'll bring my caster up to 2.3 range?

 

Ok truck is in the shop now for another alignment. I told the tech to set it at 0 camber and toe and 2.3-2.4 caster. Hopefully that makes it handle a little better? I'll post my new alignment sheet in a bit.

 

Well i just got my truck back. They didn't do anything to it! They said they got too busy! They want me to bring it back on monday and leave it for 2 days!