1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

SUSPENSION 2ND GEN ?'S

Discussion in 'Suspension' started by c.coulby, Nov 8, 2010.

  1. Nov 8, 2010 at 7:35 AM
    #1
    c.coulby

    c.coulby [OP] Well-Known Member

    Joined:
    Aug 22, 2010
    Member:
    #42066
    Messages:
    358
    Gender:
    Male
    First Name:
    Cameron
    Summerville, Georgia
    Vehicle:
    2009 TRD Sport
    OK so here is my setup,

    I have currently 265's on my truck. I'm wanting to go to 305's. Which would be a 33" tire. My truck has the silver Bilstein shocks, they are set on 1.75" on the front and i THINK i have aal on the back. If i were to go to the 33" tires what size block would i need in the back and what size spacer for the front shocks? Also, what backspacing and offset would i need for the wheels. (would i need wheel spacers)? I currently have a set of 16" atx artillery wheels on 265's with no problems (rubbing). IDK what backspacing or offset they are. If i were to use these wheels how much additional lift would i need to prevent rubbing with 305's? (33's)


    Thanks in advance and i really appreciate any help/advice you can give me..
     

Products Discussed in

To Top