Am I good to go?

I think I'm about ready to install my lift and just want to make sure I have everything I need. I have the following:

5100's front and rear
Dakar leaf springs
New bushings
Extended U bolts

Am I good to go? Is there anything else I MUST have before I get started?

Thanks in advance for your help.

 

Its a good thing you got extended U bolts. I got DAKAR leafs in the back too but I just used the same U bolts. Probably not the best choice but I re-threaded them so I think I will be okay. 5100's were a good choice too

 

Only thing I think you may need are extended brakelines. I'm not 100% sure but I think if you install the dakars you should also get the longer brake lines

 

breaker bar, PB blaster and maybe even a torch or cut-off tool depending on where you live (sometimes those things get really rusted on there). A little patience and an extra set of hands doesn't hurt!

 

Have the Dakar leaf pack installed, no extended brake lines needed.

I would suggest the drive shaft spacer. You might get some vibs if you dont. GL

 

Thanks for straightening me out on that, again I wasnt sure though.

 

NP, some people go ahead and replace them and others dont. Its just a personal preference but ins't required.

 

Thanks for the help everyone. I will definitely post pictures when I'm done!