ome 881 vs 882

I've searched and searched does any body have a allure frt with winch on 1st gen? If so how much lift did u get and what springs r u running? I have the wheeler 5 leaf 1.5 lift in back and just want a level truck with room for 265/75/16. I think this is a pretty light setup and the 882 mite be to high for me. Thanks for the help.

 

Yeah if your just trying to do 265/75/16's the 881's should be fine the 882's might be too high.

 

Come on guys and gals how much are your 882 settling how much lift do u have in the back to sit level with winch bumper and 882 and the.same.goes for 881

 

Give us your truck specs and if you're running any extra weight up front or rear

 

Lol I tried to in my first post but damn auto correct on phone. I'm gunna run a allpro bumper with a m8000 winch with the steel cable. In the back I have wheelers 5 leaf but mite throw in there aal so 1.5 to 2 inch in back. I had revtek on the front and found a smoking deal on some 882 and 5100 on cl and swapped them on damn I'm almost an inch higher than the revtek. No bumper yet so I need it to settle about 1.5 inches to sit level and not eat cvs. The truck is a v6 extra cab. Think I kite have to swap the 882 for 881.

 

you'll be fine. member "mixaro" is running 882's with the stock bumper and a 4cyl.

I have 882's on order, and I've got a v6 ext cab with about a 40-50lb front bumper.