Tacoma World Forums

Tacoma World Forums (http://www.tacomaworld.com/forum/)
-   Suspension (http://www.tacomaworld.com/forum/suspension/)
-   -   OME Trim Packer question (http://www.tacomaworld.com/forum/suspension/235366-ome-trim-packer-question.html)

Ryan81 08-20-2012 12:30 PM

OME Trim Packer question
 
I think once I get a Tacoma I've decided on the OME setup with 2" AAL in the rear and new LR upper control arms. I would like to get closer to 3" but also want to correct the "taco lean" so I thought about stacking two trim packers. Is this safely, doable?

I would do two on the driver's side and then 1 on the passenger side to still gain some lift over there. Two of the 5mm packers would be less than 1/2"(12.7mm) so I don't see any difference between the 1/4" or 1/2" optional spacer.

OZ-T 08-20-2012 12:32 PM

What shocks are you getting ?

Ryan81 08-20-2012 01:03 PM

Quote:

Originally Posted by OZ-T (Post 5564327)
What shocks are you getting ?

The ones that come with the OME kit.

Front: 90000 sport shocks
Rear: N182 shocks

OZ-T 08-20-2012 01:36 PM

Quote:

Originally Posted by Ryan81 (Post 5564446)
The ones that come with the OME kit.

Front: 90000 sport shocks
Rear: N182 shocks

In that case , I would suggest using the OME trim packer on the driver's side shock , it mounts below the coil seat , and then put a 1/4" top plate spacer on both the driver and passenger side .

Bayou Sultan 08-21-2012 03:25 PM

OZ-T I just had a OME lift installed with the 885s and 90000 shocks with the Maxtrack spindles in front, and N182s in the rear to include the Allpro Expo leaf pack. It was installed two weeks ago. I am sitting at 26" in the rear and 27" on the passanger in front and 26 1/4" on the driver side front. Should I waite to let it settle more or what would you suggest to correct the driver side. The trim spacer was not used and the top plate 1/2" spacers were not used either. I would like to stay at 27" in the front and bring the rear up to 27" and even it out. What is your advice. Thank's

OZ-T 08-21-2012 03:34 PM

I would say , 1/4" top plate spacer , driver's side , that way you wouldn't have to disassemble the coil / shock

DeeKay21 08-21-2012 03:35 PM

Quote:

Originally Posted by OZ-T (Post 5564576)
In that case , I would suggest using the OME trim packer on the driver's side shock , it mounts below the coil seat , and then put a 1/4" top plate spacer on both the driver and passenger side .

X2. We just did this on my friends truck this past weekend.

Bayou Sultan 08-21-2012 05:53 PM

You are the MAN OZ-T Thank you very much.


All times are GMT -7. The time now is 03:49 PM.