1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Wheeler's 3 leaf progressive AAL - Cutting alignment brackets

Discussion in 'Suspension' started by Ronn, Jan 21, 2013.

  1. Jan 21, 2013 at 12:53 AM
    #1
    Ronn

    Ronn [OP] Well-Known Member

    Joined:
    Oct 5, 2010
    Member:
    #44253
    Messages:
    207
    Gender:
    Male
    First Name:
    Ron
    Northern Ontario
    Vehicle:
    2007 DCLB 4x4 SR5
    Westin bullbar, KC slimlites, Mini D2S headlight retrofit, 5100 front @ 1.75 and 5100 rear, Wheelers HD leaf pack
    Called Wheeler's the other day about their progressive AAL. They gave me the measurements:
    Short side 15 inches from centering pin
    Long side 18 inches from centering pin

    Apparently there are different styles of TSB springs that were installed on our trucks. Mine is an 07 DCLB SR5 4x4 and has factory TSB leafs. The bracket to the front measures 17 inches and the rear bracket measures 16 3/4 inches, so I would have to cut one.

    Just wanted to post this as an FYI so you can measure first and know if you need to cut or not. I'm sure there are others like me who would want to know this kind of info before buying. Hope this helps someone.
     

Products Discussed in

To Top