1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

6" Fabtech suspension removal help?

Discussion in 'Suspension' started by Robmonster117, Sep 30, 2013.

  1. Sep 30, 2013 at 4:07 PM
    #1
    Robmonster117

    Robmonster117 [OP] Well-Known Member

    Joined:
    Sep 29, 2013
    Member:
    #113490
    Messages:
    1,920
    Gender:
    Male
    First Name:
    Robert
    Gilroy
    Vehicle:
    02 ext. cab 4x4
    Truck parts
    I'd like to know a little more about what I'm getting myself into on this project. My tacoma has a Fabtech 6" lift on it and also a 3" body lift. both I'd like to take off. I bought the truck like this and it had 37" tires on the motha. I took it down to a more practical 33" tire. Now what I'm looking at is taking the body lift off first, then focus attention on the suspension.

    As far as I've researched it seems that my biggest problem is going to be dealing with the cut crossmember.

    If anyone could give me some more details on things I will need to make this happen, or refer me to a thread i haven't seen that had a similar situation that'd be awesome. Thanks for the help!
     
    Last edited: Sep 30, 2013

Products Discussed in

To Top