||06-10-2010 03:39 PM
Originally Posted by 17hmrtaco
i have a 2.5 inch lift on my 03 4 door taco im not sure what kind it was on there when i got the truck but i want to replace the shocks with billys but idk what size could someone plz help me
Someone correct me if I'm wrong.. but the OP has possibly 1 of 3 or more lifts/combinations.
1. 5100's already (set at 2.5)
2. Higher Spring Coils
4. Combination of one or more..
If you just want to change out to billy's and keep everything else the same, then just order from one of the many vendors (DSM, Wheelers, Toytec, etc) for billy's for the '03 taco, set them at "0".. and there is nothing else to do..
If you want to "just" run billy's at 2.5, then your gonna have to make sure that you have the stock height coils..or your gonna wind up with a higher lift than just 2.5
If you are just looking for the model/code for billy's that fit your '03..(which I hope you didn't start a thread just asking for that) type in bilstein 5100 03 tacoma in google and look around....