2000 Tacoma Emergency Brake Light Problem, How can i fix it? PLEASE HELP

So my Emergency Brake light keeps turning on while im driving and i cant figure out why. I changed the Brake switch but i still have the same problem and my brake fluid is fin as well. Any suggestions?

Thanks

 

Did you change the switch on the parking brake? Or on the brake pedal? The two things that will turn the light on are the parking brake switch and the low brake fluid switch. Perhaps the float switch in the brake fluid reservoir is bad?

 

i changed the one on the parking break pedal and it didnt go out so idk what to do

 

If it were me, I would look under the dash at the parking break switch and make sure it's actually getting pressed in. Then, pop the hood, disconnect the connector going to the brake fluid reservoir switch and see if the light goes out with the park break off. If not, try jumping the two terminals inside the harness connector at the reservoir switch. I am not sure if you are opening or closing the circuit when the brake fluid gets low.

I am thinking you have a sticky float switch.

 

I fixed it right now, guess my dad didnt check my break fluid good and turned out it wasnt topped off, now that i topped it off it turned the light off.

thanks anyways guys for the help