Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Garage > Technical Chat

Notices

Exhaust Installation Help

Reply
 
Thread Tools Search this Thread
Old 10-24-2011, 05:43 PM   #2
Senior Member
Chris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shed
 
Chris(NJ)'s Avatar
Law Enforcement:
Name: Chris
Joined: Jan 2010, #29777
Location: Usually in Central Jersey
Age: 35
Gender: Male
Posts: 2,707
Chris(NJ)'s Tacoma Gallery
Torqued, but i'll be damned if I can remember the # right now. I want to say its something like 42-44?
  Reply With Quote
Old 10-24-2011, 05:45 PM   #3
Senior Member
Chris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shedChris(NJ) is one of the sharper tools in the shed
 
Chris(NJ)'s Avatar
Law Enforcement:
Name: Chris
Joined: Jan 2010, #29777
Location: Usually in Central Jersey
Age: 35
Gender: Male
Posts: 2,707
Chris(NJ)'s Tacoma Gallery
eh, I stand corrected:

INSTALLATION
1. INSTALL EXHAUST PIPE ASSEMBLY FRONT
(a) Install a new gasket onto the exhaust manifold RH. (b) Install the exhaust front pipe with the new 2 nuts.
Torque: 62 N*m (632 kgf*cm, 46 ft.*lbf)
2. INSTALL EXHAUST FRONT PIPE ASSEMBLY NO.2
(a) Install a new gasket onto the exhaust manifold LH. (b) Install a new gasket onto the exhaust front pipe. (c) Install the exhaust front pipe No. 2 onto the
insulator. (d) Install the exhaust front pipe No. 2 onto the exhaust
manifold LH with the new 2 nuts.
Torque: 62 N*m (632 kgf*cm, 46 ft.*lbf)
(e) Install the exhaust front pipe No. 2 onto the exhaust front pipe with the 2 bolts and 2 nuts. Torque: 48 N*m (489 kgf*cm, 35 ft.*lbf)
(f) Install a new gasket onto the exhaust front pipe No. 2.
(1) Using a wooden block and plastic- faced hammer, tap in a new gasket until it is flush with the exhaust front pipe No. 2. NOTICE: • Make sure that the gasket is in the
correct direction when installing. • Do not reuse the removed gasket.
3. INSTALL EXHAUST PIPE ASSEMBLY CENTER
(a) Check the free length. (1) Using vernier calipers, measure the free length
of the compression spring.
Minimum: 40.5 mm (1.594 in.)
If the free length is less than the minimum,
replace the compression spring. (b) Install the exhaust tail pipe onto the 4 insulators. (c) Install the exhaust pipe center onto the exhaust
front pipe No. 2 with the 2 bolts and 2 springs.
Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf) 4. INSTALL HEATED OXYGEN SENSOR (See page EC-
19)
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 6. CHECK FOR EXHAUST GAS LEAKAGE
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
TRD Exhaust Installation w/ pics thebottomline 2nd Gen. Tacomas 58 08-15-2014 08:29 PM
TRD Exhaust Installation Instructions se7en 2nd Gen. Tacomas 29 04-25-2014 01:56 PM
Exhaust installation cyuhlater Technical Chat 1 02-25-2011 09:53 AM
TRD Exhaust installation tcbe6472 2nd Gen. Tacomas 5 01-23-2010 03:16 PM
Installation of my Gibson exhaust and review slimcubby Product Reviews 22 10-10-2008 03:11 PM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.