Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Garage > Technical Chat

Notices

Intermittent front end shake post Camburg Spindle Install

Reply
 
Thread Tools Search this Thread
Old 06-15-2012, 03:19 PM   #1
TacoLife08 [OP] TacoLife08 is offline
Senior Member
TacoLife08 is just really niceTacoLife08 is just really niceTacoLife08 is just really niceTacoLife08 is just really nice
Air Force:
Joined: Mar 2012, #75807
Location: GA
Gender: Male
Posts: 259
TacoLife08's Tacoma Gallery
Intermittent front end shake post Camburg Spindle Install

ok the spindles went on about a month ago and ever since ive had this very odd shake (not vibration) in the front end.

Before the spindle install i was running a spacer lift and had no vibes, shakes what so ever. i also already had the new set of tires that i am still running with that spacer lift. so i am not considering a tire/wheel issue at this time.

let me get into exactly whats happening. The shake usually starts at about 45+ mph and stops around 60 mph. Whats odd about this shake is that sometimes the steering wheel will shake very violently in between those speeds and other times the steering wheel will be silk while only the front end literally bounces up and down like im riding around in a blender. ive expiremented with the causes of the shake frequently and noticed that when the steering wheel is not shaking (only the suspension), when i enter a steady left hand turn at the same crusing speeds of 45-60 mph the steering wheel will begin to shake again midway through the turn and the suspension shake will mellow out to a dull shake. so basically on a straight road which ever shake i have to begin with i.e steering wheel and/or front end shake i will continue to have it untill i make a left hand turn in which the shake will shift from steering wheel to suspension.

so i guess my main question is ...

this is what ive done since the spindle change in an attempt to rectify the issue:

2 alignments
1 tire balance
1 tire rotation
fluctuation of tire pressure from 30-40 psi

Any Ideas???
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
poping in front end after camburg spindle lift checker c5 2nd Gen. Tacomas 45 06-01-2012 06:43 AM
front end shake surfbum1 2nd Gen. Tacomas 1 05-19-2012 12:27 PM
front end binding after uca install markc6606 Suspension 6 05-21-2011 06:21 AM
Camburg Spindle Install HELP dira1987 Suspension 9 04-22-2011 01:44 PM
MT and front end shake question Redgrom Wheels & Tires 1 05-24-2010 11:41 PM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.