Originally Posted by dysfunctnlretard
Not sure what you mean by good but Ive been trying to do my own work lately, at least what seems "doable". I can work a screwdriver and a socket wrench. Dont have an impact one tho.
Ok... What Im going to tell you to do is pretty easy. If you are uncomfortable doing this, get a friend to help, or a Member in your area.
Jack up the front of the truck, and position a jack stand under the frame. Remove the front tire. Loosen the UCA bolt. Its the long one that attaches the UCA to the frame. After the UCA bolt is loose (do not remove the nut), pump some grease into the bushing. both sides. Then, Tighten the bolt to 90 lb-ft. Do the same for the other side, and see if that fixes the squeak.