Can you add a body lift to a suspension lift?

I haven't bought my Tacoma yet but I plan on lifting it 3" with the bilstein 1500 and add a leaf kit. I would like to know if i can add a 2" spacer lift on top of the suspension lift to give my truck a 5" lift. Can you do this & Pros/Cons? 2ND GEN TACOMA

 

You can its highly unadvised. It will be top heavy body lifts arent that great. I would stick with 3 inch suspension lift or if you want more do it right and do a 6 inch instead of suspension and body. Whats the reason for wanting 5 inches just curious

 

Id like a 6 inch lift but they are much more exspensive than the 3" lifts. Maybe ill go with 3" lift + 1" or 1.5" body lift.

 

you going to do the body and suspension lift yourself?

 

no

 

It will be cheaper for you to buy a 6 inch, labor on a 3 inch isnt horrible, but labor on a body lift is alot of $$$$

 

Are you talking about putting spacers on the coils or doing an actual body lift? I wouldn't advise either one but you're going to have different consequences with spring spacers vs. body spacers.

 

is the truck 4wd? if not you can get spindles for under 500...

 

Think he means adding a body to suspension that the thread title, but the question in the post seems like hes asking if he can add spacers to the 3 inch lift. The cv angles would be very interesting.

 

Some guys on here......I believe homertaco is adding a 1" BL to his 3' suspension through another guy on here from New Jerz. I was actually pondering this as well.......a 1" BL is not a lot but will give ya some more lift and allow ya to stuff some bigger tars in there too.