2005, 4x4, sr5, v6 6speed. Looks like it was used on some ranch trails. 75K miles
So Iv had this taco for a week and my back is messed up worse now. I tried moving the lumbar adjustment and it laughed at me. I had to drive the truck for 4 hours the other day and decided enough was enough, I ain't got no money for this BS so I'm fixin it one way or another.
When I sit in it, My L1-4 just sank right in. So here is my seat fixin' write up, if you don't like it, then change the channel.
We start with the two bolts in the front 14mm
then these two in the back
lift up the front and disconnect the two plugs (the ground on my black plug is missing must be seat belt warning?)
Then take the seat out and into the shop
take off these metal ring staples underneath (I cut them and replaced them later)
lift up the flap in the back and more staple rings
now we can jimmie up the front cloth a little
look bout 3 inches up in front, more staple rings
now we can start to shimmy up the material more and see whats up with this farking seat