1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Back-up camera help

Discussion in 'Technical Chat' started by jagency1, Mar 7, 2010.

  1. Mar 7, 2010 at 6:47 AM
    #1
    jagency1

    jagency1 [OP] Well-Known Member

    Joined:
    Nov 24, 2009
    Member:
    #26466
    Messages:
    56
    Gender:
    Male
    brandon florida
    Vehicle:
    07 TRD DCAB
    I just installed a camera on my truck and cant seem to get it to come on when in reverse. I can see video on the camera if I use in manual mode.

    I hooked the power to the reverse wire ( i used a tester and found the wire that powered the test light when truck was put in reverse so I assume that is the correct wire).

    I have a kenwood 8120 is there a setting I must change on the HU?

    Thanks for any help...
     

Products Discussed in

To Top