Two Guys Garage / Truck U on Speed

[Two Guys Garage]

we have a few companys that do bolth . we will lower it or make it higher but we will not leave it the same hight, We like to do a lot of fun stuff in this TACOMA show.
Great input thanks keep it coming
we would love to do a rock show too

this will shoot in july to air in sept

Thanks
All

[Two Guys Garage]

we film in tampa

[rick]

Originally Posted by Two Guys Garage

we film in tampa

sweet!! can i come and watch?

[roxspin72]

Do a lift, I would like to see a FABTECH set up, and maybe a performance run..

Do you have date a possible channel for Time Warner?

[Two Guys Garage]

Rick Nice pic and some great input if you would lie to see the shoot you are welcome

[piercedtiger]

Welcome Jim! I'd love to see the show too! Will have to set the DVR once I know when it'll be on!

A lot of the mods people do on the cheap are listed in the thread in my sig. I'm a big fan of cheap mods, but things that actually increase hp or mpg peak my interest! Seems to be a lot of conflicting data on the results of intakes, exhaust systems, etc. Only thing I've really seen proven to add hp is a URD or TRD supercharger. And only thing I've seen to improve mpg is the AFE Pro Dry filter I added to mine (2-3mpg). Other mods I've done that claimed to improve mpg or hp have had no effect. And I have yet to see a programmer like there are for domestics that can increase power OR mpg depending on the setting you use.

[Don G]

Hey Jim!!! I watch the shows most of the time, great watching. I would like to see how much you could stretch the mileage!!!!!!! Keep up the good work

[Cburt]

How about covering installation of the Toyota super charger?
When is it going to air?

[Coreyjon]

Welcome to TW Jim.

My suggestions:
Rework front/rear suspension to provide increased wheel travel and tire size allowances. (Camburg Engineering)

Exchange rear drum brakes with disk brakes.
Exchange two piece drive shaft with one piece drive shaft.

Install new front bumper with winch, light bar, and upgraded front skid plate.

Replace stock intake and exhaust, I recommend TRD - simply because it shows off Toyota's in house capabilities.

I'm looking forward to seeing what you guys come up with.

[Fast Eddie]

Thanks for the heads up Jim. Radical is always cool but for some of us middle aged family guys we still need functionality of a daily driver. I like originality, performance, yet subtle clean lines.

I have the TRUEFLO XDi Cold Air Intake that has way different sound than any K&N I've installed on previous vehicles but there is a droning sound around 3800-4000 rpm that I would love a professional fix for.

Everyone has WESTIN Bull bars and I don't see alot of options without going to the offroad look. I like the look of the HUNTER but don't know much about them.

Exhaust, what is the best bang for your buck without the barking sound? A FLOWMASTER changes the sound but is it worth cutting your original exhaust? Borla? Gibson? TRD?

I'm putting in a Kenwood DNX8120 and DVD Headrest's for the rugrats that will make it a little more fun inside.

Tinting the windows. What to look for so you don't look like those guys going down the street with the airbubbles everywhere.

Toytec lifts - 3" spacer front, back? add a leaf? What's the best for daily driver and maintain some sort of mileage with a set of 33's?

The possibilities are endless that's why we love our Tacoma's.

My thoughts anyways.

[Two Guys Garage]

looking into the vedio Headrest, lift kit, roll bars and tintes windows
there is one company that I would love to have on the show and they are just right for the Toyota show http://www.mobilevideo4less.com
thanks for your help