Just bought a '01 PreRunner and it had the factory VIP installed with glass break sensor. Of course I didn't get the remotes with it(dealer purchase). So I bought the correct part # remote from ebay. I used the reprogramming proceedures I found on this site but when the system is supposed to chip and lock/unlock the doors 2, 3 or 4 times at the end of the instructions it only chirps once. I tried for about 30 minutes with no luck. I found the brain and pushed the green button on the side and the light for the system on the dash blinks so I know it is getting power and the remote light flashes when I push the lock/unlock button. The system does not arm even when I use the key to lock the doors. Any ideas?
I'm about ready to take'er to the dealer. ARGHHH