Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Discussion > Toyota Trucks & SUVs

Notices

Can some one tell me what hooks to this? Also wried miss after motor swap

Reply
 
Thread Tools Search this Thread
Old 09-23-2009, 01:06 PM   #1
1999 Taco TRD xtracab 3.4 V6 4x4
1999tacotrd is on a distinguished road
Joined: Apr 2009, #16160
Location: Ok
Gender: Male
Posts: 145
1999tacotrd's Tacoma Gallery
Can some one tell me what hooks to this? Also wried miss after motor swap

Hi first off i just did a motor swap about a month ago on my 88 toyota 4x4 and the motor came from a 86 4runner and it strats and runs but its misses well like i can take off in 1st gear and it wont miss then i can shift to 2nd and it will do fine till i push the gas so far down to try to pick up speed then it starts missing and sputtering till i shift to 3rd then there on out same issue! I put new plugs on the truck and i got brand new plug wires and rotor but i cant use them cause the dam truck uses male ends on all the plug wires and coil pack as to my new rotor and wires are female! But odd thing is it didnt do it with the original motor so im thinking its something else.


Also i found this pipe sucking air into the motor! what the heck is it? my other motor didnt have this

Can some one tell me what hooks to this? Also wried miss after motor swap-img00015-20090923-1323.jpg

Can some one tell me what hooks to this? Also wried miss after motor swap-img00016-20090923-1323.jpg

and should it have a filter on it? i was thinking about hooking a hose to it and running it in the breather unless some one can tell me what it originaly hooks to.
  Reply With Quote
Old 09-23-2009, 01:09 PM   #2
:POOPCORN:
98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed
 
98tacoma27's Avatar
Marines:
Name: Ben
Joined: Dec 2008, #11714
Location: Beech Creek
Gender: Dude
Posts: 52,623
98tacoma27's Tacoma Gallery
The first pick is the cause of your problem.

Whats the second picture of?
  Reply With Quote
Old 09-23-2009, 01:12 PM   #3
:POOPCORN:
98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed
 
98tacoma27's Avatar
Marines:
Name: Ben
Joined: Dec 2008, #11714
Location: Beech Creek
Gender: Dude
Posts: 52,623
98tacoma27's Tacoma Gallery
It's the auxillary air valve. There should be a hose from it to the air box (i think).
  Reply With Quote
Old 09-23-2009, 01:18 PM   #4
1999 Taco TRD xtracab 3.4 V6 4x4
1999tacotrd is on a distinguished road
Joined: Apr 2009, #16160
Location: Ok
Gender: Male
Posts: 145
1999tacotrd's Tacoma Gallery
2nd pic was just a top view of it

there is a spot on the air box pipeing thats been blocked off dose it hook to the pipeing that gose from air box to throtle body or in the air box its self?
  Reply With Quote
Old 09-23-2009, 01:21 PM   #5
:POOPCORN:
98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed
 
98tacoma27's Avatar
Marines:
Name: Ben
Joined: Dec 2008, #11714
Location: Beech Creek
Gender: Dude
Posts: 52,623
98tacoma27's Tacoma Gallery
Quote:
Originally Posted by 98tacoma27 View Post
See that ball looking thing on the bottom left? It the resonator. It should have a pipe(hose) for the auxillary air vavle into it, then you can see the other hose that runs along the main intake. It goes into the air box.
  Reply With Quote
Old 09-23-2009, 01:31 PM   #6
1999 Taco TRD xtracab 3.4 V6 4x4
1999tacotrd is on a distinguished road
Joined: Apr 2009, #16160
Location: Ok
Gender: Male
Posts: 145
1999tacotrd's Tacoma Gallery
My truck dosent have that ball looking thing i take it the 88s didnt have this and its a 86 motor i used.

wonder if i can just run it into the air box or if it has to have that ball thing
  Reply With Quote
Old 09-23-2009, 01:32 PM   #7
:POOPCORN:
98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed
 
98tacoma27's Avatar
Marines:
Name: Ben
Joined: Dec 2008, #11714
Location: Beech Creek
Gender: Dude
Posts: 52,623
98tacoma27's Tacoma Gallery
The 22re's have it and the 22r's don't.
  Reply With Quote
Old 09-23-2009, 01:40 PM   #8
1999 Taco TRD xtracab 3.4 V6 4x4
1999tacotrd is on a distinguished road
Joined: Apr 2009, #16160
Location: Ok
Gender: Male
Posts: 145
1999tacotrd's Tacoma Gallery
Can some one tell me what hooks to this? Also wried miss after motor swap-img00018-20090923-1527.jpg

Can some one tell me what hooks to this? Also wried miss after motor swap-img00017-20090923-1526.jpg
  Reply With Quote
Old 09-23-2009, 01:43 PM   #9
1999 Taco TRD xtracab 3.4 V6 4x4
1999tacotrd is on a distinguished road
Joined: Apr 2009, #16160
Location: Ok
Gender: Male
Posts: 145
1999tacotrd's Tacoma Gallery
How hard would it be to put one in? i know where i can probly get one at.
  Reply With Quote
Old 09-23-2009, 01:44 PM   #10
:POOPCORN:
98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed
 
98tacoma27's Avatar
Marines:
Name: Ben
Joined: Dec 2008, #11714
Location: Beech Creek
Gender: Dude
Posts: 52,623
98tacoma27's Tacoma Gallery
Quote:
Originally Posted by 1999tacotrd View Post
It's part of the EFI system. You swapped RE motors?

EDIT: TOTAL brain fart........carb motors didn't have air boxes
  Reply With Quote
Old 09-23-2009, 01:52 PM   #11
1999 Taco TRD xtracab 3.4 V6 4x4
1999tacotrd is on a distinguished road
Joined: Apr 2009, #16160
Location: Ok
Gender: Male
Posts: 145
1999tacotrd's Tacoma Gallery
Im not sure i bought it the way it was it run good and i burnt the motor up so i swaped motors they both where fuel injected. My burnt up motor dosent have that auxillary air valve i can take a pic if u need it i still got the old motor.
  Reply With Quote
Old 09-23-2009, 01:57 PM   #12
:POOPCORN:
98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed
 
98tacoma27's Avatar
Marines:
Name: Ben
Joined: Dec 2008, #11714
Location: Beech Creek
Gender: Dude
Posts: 52,623
98tacoma27's Tacoma Gallery


This is what it should look like. Well, what goes to that valve you were originally asking about.
  Reply With Quote
Old 09-23-2009, 01:59 PM   #13
:POOPCORN:
98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed
 
98tacoma27's Avatar
Marines:
Name: Ben
Joined: Dec 2008, #11714
Location: Beech Creek
Gender: Dude
Posts: 52,623
98tacoma27's Tacoma Gallery
Quote:
Originally Posted by 1999tacotrd View Post
Im not sure i bought it the way it was it run good and i burnt the motor up so i swaped motors they both where fuel injected. My burnt up motor dosent have that auxillary air valve i can take a pic if u need it i still got the old motor.

I found some difference from year to year. But I think you need to get this style air box.

  Reply With Quote
Old 09-23-2009, 02:00 PM   #14
:POOPCORN:
98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed
 
98tacoma27's Avatar
Marines:
Name: Ben
Joined: Dec 2008, #11714
Location: Beech Creek
Gender: Dude
Posts: 52,623
98tacoma27's Tacoma Gallery
I can take some pics of mine later for you.
  Reply With Quote
Old 09-23-2009, 03:14 PM   #15
1999 Taco TRD xtracab 3.4 V6 4x4
1999tacotrd is on a distinguished road
Joined: Apr 2009, #16160
Location: Ok
Gender: Male
Posts: 145
1999tacotrd's Tacoma Gallery
Heres my pipeing maybe i can plug into this hole or dose it have to go into the air box ?

Can some one tell me what hooks to this? Also wried miss after motor swap-img00020-20090923-1703.jpg

Can some one tell me what hooks to this? Also wried miss after motor swap-img00021-20090923-1703.jpg
  Reply With Quote
Old 09-24-2009, 05:57 AM   #16
:POOPCORN:
98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed
 
98tacoma27's Avatar
Marines:
Name: Ben
Joined: Dec 2008, #11714
Location: Beech Creek
Gender: Dude
Posts: 52,623
98tacoma27's Tacoma Gallery
It goes directly to the air box.
  Reply With Quote
Old 09-24-2009, 09:49 AM   #17
1999 Taco TRD xtracab 3.4 V6 4x4
1999tacotrd is on a distinguished road
Joined: Apr 2009, #16160
Location: Ok
Gender: Male
Posts: 145
1999tacotrd's Tacoma Gallery
Ok i know a guy here about 15 min drive from me who has a bunch of old yotas that he parts out i will probly go buy the whole set up from him i just want to make sure this is whats causeing the truck to miss and sputter.
  Reply With Quote
Old 09-24-2009, 09:59 AM   #18
:POOPCORN:
98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed
 
98tacoma27's Avatar
Marines:
Name: Ben
Joined: Dec 2008, #11714
Location: Beech Creek
Gender: Dude
Posts: 52,623
98tacoma27's Tacoma Gallery
What caused the first motor to go?
  Reply With Quote
Old 09-24-2009, 10:30 AM   #19
1999 Taco TRD xtracab 3.4 V6 4x4
1999tacotrd is on a distinguished road
Joined: Apr 2009, #16160
Location: Ok
Gender: Male
Posts: 145
1999tacotrd's Tacoma Gallery
i had 33.12.50s on it and i was driveing down the highway and the truck didnt have a temp guage and it overheated on me and runt the motor. It wont get no compresson and it sounds like the compresson is going into the radaitor when the motor is turning
  Reply With Quote
Old 09-24-2009, 10:31 AM   #20
:POOPCORN:
98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed98tacoma27 is one of the sharper tools in the shed
 
98tacoma27's Avatar
Marines:
Name: Ben
Joined: Dec 2008, #11714
Location: Beech Creek
Gender: Dude
Posts: 52,623
98tacoma27's Tacoma Gallery
Quote:
Originally Posted by 1999tacotrd View Post
i had 33.12.50s on it and i was driveing down the highway and the truck didnt have a temp guage and it overheated on me and runt the motor. It wont get no compresson and it sounds like the compresson is going into the radaitor when the motor is turning

Oh, blown headgasket. That is fixable.
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
350 small black motor swap TheMrGExperience 1st Gen. Tacomas 0 10-01-2011 10:25 AM
motor swap for jeep blackonwhite Garage / Workshop 7 07-20-2010 09:51 AM
beware the block heater/motor swap ideas WhyteRaevin 1st Gen. Tacomas 9 07-10-2010 04:33 PM
Motor swap? Tonymoe Technical Chat 0 06-30-2010 09:12 AM
Motor swap and now water in the oil >:( 1999tacotrd Toyota Trucks & SUVs 14 08-27-2009 11:02 PM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.