17" Konig Six Shooter Wheels - Brand New

Sounds like a plan. A few other customers and TacomaWorld members are planning to be out there too. Hopefully I can meet all of you guys at some point during the show.

 

JdMeF9SiR2,

Lookin' at these for the Six Shooter 17" x 8"
Run the ET's w/after market wheels on my car w/about .45" of stud thread left between bottom of lug nut and the Hub.
Therefore I could have also used the ETXL.
Both my car (Solara) and Tacoma use the same 12mm x 1.5 lug nuts
Is the Six Shooter thick enough to use the 21138ETXL with the 1/2" of shank below the cone?
Best pics I could find w/dimensions, sorry they're not bigger
Complete spec can be found here
Damn, that confused me, hope it's clear.


Gorilla® # 21138ET



Gorilla® # 21138ETXL



Thanks.
CC

 

The Six Shooters have lug seats which are drilled extra deep (similar to the way that certain factory optional TRD wheels such as the TRD simulated beadlock wheels have deep lug seats). The Six Shooters have not been drilled with the necessary pilot hole that ET style lug nuts require (such as those lug nuts show in the photos you attached). ET lug nuts require a wider than normal pilot hole to have the shank portion fit down into the hole.

We can provide you with the proper conical seat lug nuts for the Six Shooter wheels, and you won't have any problems at all.

 

Are the 17x9 the same price as the 17x8. and will the 17x9 fit a 305/70/17 KM2?

 

The 17x8" and 17x9" are/were the same price, yes.

The 17x9" do work with 305/70R17.

Unfortunately, we do not have any 17x9" in stock, and we do not have any order with Konig due to very little demand for the 9" width.

Fortunately, the 17x8" Konig Six Shooters will also work with 305/70R17 tires (8" is an approved wheel width).

If you're looking for a similar, but slightly wider wheel we do also have the new 17x8.5" FN Wheels Five Stars available:

 

I thought the five stars were only 16"?? OMG I love those!! I need a minimum 4.5 inch bs to clear my spindles!! if so PRICE!!!

 

Then, how 'bout these?



McGard #65357 (Link)
12mm x 1.50
1.24" Tall
Required Installation Tool/Adaptor is .797" OD

Will gladly PM for a price, if you have Lugnuts to my liking.
Thanks for the Pilot Hole/Seat info, BTW
The extended thread lugnuts I posted earlier came with my Solara's aftermarket wheels from Tire Rack.
Thought it was a common requirement.
Specs never give enough details, or I might have figured it out.
EDIT: Sorry, don't seem to be able to enter link, so here ya go, if needed:
http://shop.mcgard.com/products/aut...s-requires-65300-installation-tool?sku=65357#


CC

 

Any word on when the wheels with be ready to be shipped?

 

Diddo... What's the damage on the 17x8.5" 5-stars ?

 

That's an excellent choice for a lug nut. They will work with any of our wheels. I believe McGard makes them in a variety of colors too. They are pricey, but they are the best lug nuts you can buy.

We are receiving a small shipment of Six Shooters this week, followed by a larger shipment next week, and then two more shipments in October. If you've reserved a set by adding your name to our list before mid-August you should be receiving a call from me in the next week or so, once the wheels are back in stock.

If you haven't reserved a set please contact me ASAP ( (951)735-1100 - office, (714)390-9387 - cell, FNWheels@gmail.com e-mail, or private message me), and I'll get you on the reservation list. If a set frees up from one of the earlier shipments we'll get you a set right away, and otherwise we can get you a set from next months shipment. Eventually we should have the wheels back in stock with no wait, but right now the Six Shooters are too popular for us to be able to keep them in stock for more than a few days before selling out.

The 17x8.5" FN Wheels Five Stars are $899 shipped within the continental USA for a set of four, and they are in-stock.

 

Any word on the TRD caps clearance on 4X's

 

Well, anyone have this combo?

 

I have an MGM and I too would like to see what that would look like with the bronze color.

How much are six shooters shipped and lugs??

 

JdMeF9SiR2,

Please update the current inventory of Six-Shooters on the 1st page, as of the time you post it, please...





Did I mention, PLEASE...!

 

I will have to dig around to see if I can find that for you. In my humble opinion, graphite gunmetal or matte black would be a better color combination on an MGM truck.

I do have some photos of Konig Countersteer Type X wheels in matte bronze on MGM Toyota trucks (4Runners and Tacomas), but the Six Shooter matte bronze is a little different than the Countersteer Type X matte bronze.

$899 shipped within the continental USA for a set of four. We ship using FedEx Ground/Home delivery, fully insured with signature confirmation. We also double box all wheels to ensure they get to you in perfect condition.

Thanks John. Sorry I had overlooked that update. I just updated it now.

 

Wheels came in today.....thanks Dustin at fnwheels! Awesome guy to do business with.

 

It's that gun metal graphite?

 

Polished aluminum....new color choice. Only 50 sets sold in US and Canada

 

Nice. I will be getting my rims soon. Lol

 

Hey Dustin, did you get my PM about FN wheels? You down with meeting up at SEMA next week to chat? thanks