Will this work ?

Size: 18x9 xd rockstars
Offset: 0mm
Backspacing: 5.00"
Bolt Pattern: 6-139
Tires 285/60/18
Or 285/65/18

Will this work with no trimming on a 2-3" lift without the tires sticking out past the flares 2"
DC 4x4 long bed

 

http://www.tacomaworld.com/forum/at...terra-grapplers-zack-truck-new-wheels-021.jpg

I would like to keep the size but keep the tires flush with the flares

 

keep searching, but i believe your fine with that size, might have to trim cab mount, but with that backspacing you might be out of the fender wells just a tad.

 

You can't run 285's with a 5" backspaced wheel. you need 4.5" or less.

Even if you had a 4.5" backspaced wheel, the 285/65/18's will not fit without trimming.

That being said, a lot of people are running 33's on their 3" lift. They just deal with trimming fender well plastic and possibly chopping the cab mount.

 

^ x2

 

the 285/60/18's will definatley fit. The 285/65/18's will probly require some trimming and might rub the upper control arm.

 

With 5.0 backspacing? I doubt 285 width will fit.

 

The 285/60/18's will work with that backspace. That tire is not gonna be as tall as the upper control arm. So as long as he stays below the upper control arm then he shouldnt have any rubbing issues. I believe Chris4x4 runs that size in a 5.71" backspace and it doesn't rub.