33" tires?

285/70/17's -6mm offset and 4.50 back spacing. No rubbing on the cab mounts but had to do some trimming on the inner fenders, maybe about an inch front and back. A little more on the splash shield. 3" revtek leveling kit.

 

285/75/16 are perfect with little trimming

 

the most you will have to trim is the plastic lines inside your fenders, what i did is this: on the bottom of those plastic liners it makes a little bump or roundish design and i just took a dremel and cut it off and since i wanted it to look clean i flipped that piece around and glued it back in backward so the whole thing is flat, same with the back. its honestly not worth getting 31" tires over an inch of trimming plastic, you dont even needa touch the cab mounts, its a 5 minute job and trust me with 2.5" or 3" of lift 285s look ALOT better
oh and to the guys talking about gearing, i have a 2.5" lift and 285s and i geared to 4.88s (kinda extreme but ill be moving up to 35s in the summer and i do alot of prerunning instead of crawling and stuff), the gears are awesome and if you have money i think everyone should get it done!

 

Are you a 4x4 or Pre Runner. That makes a difference on the trimming from what I see on here.

 

33in by how wide? What size rim and offset etc?

 

285s

 

20x9 4.5 offset -12 33x12.50

 

What size rims are those?

 

They are 20" I just like no how wide they are ??