knowledge needed

I'm looking at buying,

MOTO METAL - M0951 BLACK
17x9

FIRESTONE - DESTINATION A/T
P285/70R17


I have a 2009 pre-runner with a 3 inch lift will these rub on turning and if so would spacers help and how big would be advised, or would 16x9 wheels and tyres just be a better solution.
But would prefer the 17,s
All advice welcome

 

you will have to trim the inside of the front fenders but you will still probably rub but its pretty minor. go with the 17x9's with a 4.5 inch backspacing

 

thanks for that but i'm new to this would the spacers help if so what size and how do i get that back space or how do i check that on the wheel???

 

no your 951 have 4.5 back spacing already

 

so no spacers needed unless i want a wider stance correct

 

well the 4.5 inch back spacing will give you a wider stance on their own.

 

i running 285/75/16 on 951....

 

is that on a 3 inch lift

 

5100's at 2.5 and a 2"aal

 

Spacers on top of the 4.5" backspacing would likely make the rubbing worse.

 

^^^THIS

 

thanks for the info everyone