|08-26-2008, 05:36 PM||#1|
go big or go home
dick cepek wheel questions
I was looking at getting a set of 16x8 dc-1 polished wheels for my 08 D cab and was wondering if you can use the stock lugnuts on those wheels and what is the backspacing and offset of the wheels. The last thing I want is to order the wrong wheels. And will the stock TPMS sensors work in the wheels. Another thing where did yall oreder yours from and how much were they. Thanks for all the help yall.
|08-26-2008, 10:17 PM||#2|
4x4 Trd Off-road 2006 Access Cab Manual
Donahoe (Icon) C/O, TC UCA's, Dakar leafs, BilStein 5125's, 285/70/17 BFG MT KM2's, Raceline Renegade 17x9's, u-bolt flip kit, debadged, TRD CAI, TRD exhaust, URD MAF controller, 20% front window tint, 3M clear bra on bumper, cam locks in all storage compartments, fog light mod, Alpine X100 deck, Co
Contact DC to find out back-spacing. You will want between 4 1/2 - 5" of backspacing.
As for the TPMS sensors, if you have the Toyota factory aluminum wheels now, the sensors will transfer over to the DC's. If you have steelies, the sensors will not transfer over, as the angle of the valve stems is different and thus won't fit.
Regarding price, search online, find a cheap price, then go to your local Discount Tire or equivalent and have them order the rims/tires for you. Most tires stores will do a very good job of price-matching.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Dick Cepek DC-2||Scosh||1st Gen. Tacomas||9||02-23-2011 08:16 PM|
|Anyone with Dick Cepek?||travis9287||Wheels & Tires||2||02-18-2011 10:46 PM|
|Dick Cepek 1's||ODICA||Wheels & Tires||7||01-01-2010 12:16 PM|
|Dick Cepek DC-1 questions||TigersTacoma||Wheels & Tires||6||06-11-2009 10:32 AM|
|Dick Cepek DC-1 Wheel Black||tarheelfan_08||Buy / Sell / Trade||0||01-05-2009 09:28 PM|