Will 265/75/16 fit with Eibach lift springs?

Hey, this is my first post on TW and I just want an opinion on tire sizing.
This will be my first real mod to my taco (besides some TSB's and accessories); I'm getting the Toytec/Eibach 1.6" lift springs to put over the stock shocks (for now, until i can find the 5100 billys in stock somewhere) and also getting new tires on the factory 16" steel wheels (hankook dynapro atm). I wanted to make sure I can fit 265/75's with the lift of the eibach springs.

Thanks!

 

Welcome to TW!
I currently am running 5100s set at zero on eibachs with 265-75-16 Goodyear Wrangler Duratracs with no problems at all. Technically you should be able to run those tires stock without the eibachs too. You might want to wait for some 5100s to come in stock before you mount the eibachs on the stock springs that way you dont have to install the springs on again which is kind of a hassle.

 

this is mine with 5100's @.85 and eibachs running a 265/75/16 Dynapro's just to give you an idea of what it looks like when you get your 5100's

 

I am running the same size w/ my ebiach and 5100's.
wity hancooks

 

if thats with that....i cant even imagine what 4in's will look like with my spindles......im gona hav to get new rubbers cuz with 2.5 of lift those look small and im running the same size tire

the again its only a 1.5in more.......back to the drawing board

 

with 4" they would look tiny, i could have went with 285's but didn't want to do any cutting and stuff and with only a 16" rim it's not that bad. if i would have went with a bigger rim i think it would have looked kinda fugly.

 

265/75/16's will fit under stock suspension as said above. Here is my 5100/Eibach setup.