What size wheel fit 265 tire??

Hey guys. Im putting my new 265/75/16 tires on today and have the 16x8 stell facotry wheels. Im want these dick cepek ones. they look nice and cheap. what size and back spacing do i need. I know i need 16x8. would it be 5-5 bolt circle 4 back spacing and -12 offset. I just had no idea and would i need wheel spacers or no. I suck at this but i know ill need new tpms. thanks i have 2010 dc

 

Oh and where is a place cheap to get new tpms. sucks that the stock steel wheels tpms wont change over to new wheels

 

You will want 6 on 5.5 bolt pattern, and if yopu only want to fit 265's, you can get anywhere from 4.5" to 5.5" backspacing.

You will not need new TPMS. The wheel shop will either flip the sensors 180 degrees, or they can use TPMS straps to hold them in place.

 

Ok thanks so just to make sure here is the page of the sizes.


can you pick out the one i need. Just paste the part number on here. thanks I just see no 6.

Here is the link


http://www.dickcepek.com/wheels.php?item=DC2Black

and if i sound so dumb sorry lol.

 

1168412** This ones has the right bolt pattern and 4" of backspacing. They will stick out 2.5" more than your stockers. (1" from the width, and 1.5" from the backspacing.)

Some have reporting more rubbing at 4" backspacing than 4.5", but it doesn't appear the DC-2's come in 4.5" BS for a 16x8.

 

That's the center cap part # Ben

 

Ok thanks guys so much. So do you think putting these wheels on my new 265/75/16 will rub the front wheel well if i get them.

 

I like these wheels alot. I just wanna make sure that they will fit the new tires and be ok and not rub alot lol. You guys are the best.

 

I doubt it would rub anything except maybe the front mudflaps if you are unlucky.

 

I'm actually the second best. Ben is the best.

 

you two are both the best lol. And thanks again. I took my front mud flaps off so I should be good and they not rub