1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

33.12.50.17s on limited tundra wheels????

Discussion in 'Wheels & Tires' started by DawgFan, May 23, 2011.

  1. May 23, 2011 at 9:43 PM
    #1
    DawgFan

    DawgFan [OP] Member

    Joined:
    May 4, 2011
    Member:
    #56049
    Messages:
    11
    Gender:
    Male
    Jefferson ,Ga
    Vehicle:
    07 Trd Offroad dc
    I wanna know if you can fit a 33x12.50 on the 17 inch tundra limited wheels that are split spoke . I think they are a 17x7.5 but just curious if that size tire would be too big for that wheel , and or if anyone has pics or can find pics of that size tire on that wheel???? DOES ANYONE HAVE GOOD PICS OF THIS SETUP??? I have seen this setup in a crappy pic but cant really tell.
    I wanna do wheel spacers of course but wanna fit a 33.12.50 on my tundra wheels. This is a pic of my truck with 285.70's
    IMG_5571_48541f668709bdf4ba3819ffd4e059bf259cb167.jpg
     
  2. May 23, 2011 at 9:54 PM
    #2
    ds46000

    ds46000 Well-Known Member

    Joined:
    Feb 15, 2011
    Member:
    #51206
    Messages:
    241
    Gender:
    Male
    Vehicle:
    07 PreRunner TRD Sport
    did you have to do the cab mount chop w/ those 285's? Also, can you put 285's on the stock wheels, or was that the reason you now have those tundra wheels? they look good by the way.

    ps, what kind of lift do you have?
     
  3. May 23, 2011 at 9:58 PM
    #3
    DawgFan

    DawgFan [OP] Member

    Joined:
    May 4, 2011
    Member:
    #56049
    Messages:
    11
    Gender:
    Male
    Jefferson ,Ga
    Vehicle:
    07 Trd Offroad dc
    no just slight cutting on the plastic flares.
    yes 285's will fit on stock wheels
    thanks!
     
  4. May 23, 2011 at 10:01 PM
    #4
    jberry813

    jberry813 Professional Fluffer Moderator

    Joined:
    Jan 21, 2011
    Member:
    #49636
    Messages:
    28,471
    Gender:
    Male
    First Name:
    Jason
    Lake Tahoe
    Vehicle:
    2012 DCSB Sport
    ...too much shit to list.
    Short answer....no.

    Factory split spoke Tundra wheels that you have are a 17x7.5 with a 5" backspace (I know cause I had those exact wheels on my Tundra when I bought it).

    33x12.50's (305x65x17) will rub on the frame and the UCA. If you get 1.25" spacers and you'll be rubbing on the pinchweld area and fenders. And, most importantly, most 305's minimum recommended wheel width is 8.5".
     
  5. May 23, 2011 at 10:15 PM
    #5
    jberry813

    jberry813 Professional Fluffer Moderator

    Joined:
    Jan 21, 2011
    Member:
    #49636
    Messages:
    28,471
    Gender:
    Male
    First Name:
    Jason
    Lake Tahoe
    Vehicle:
    2012 DCSB Sport
    ...too much shit to list.
  6. May 23, 2011 at 11:57 PM
    #6
    DawgFan

    DawgFan [OP] Member

    Joined:
    May 4, 2011
    Member:
    #56049
    Messages:
    11
    Gender:
    Male
    Jefferson ,Ga
    Vehicle:
    07 Trd Offroad dc
    pinch weld .....cab mount and fenders will be taken care of. Def going to take the plastic fenders off and cut the metal back a few inches.
     

Products Discussed in

To Top