going from 5.25"bs to 6"bs

I am looking at a set of 2008 fj wheels to put on truck. he said the bs was 6 in I dunno what the offset is but would I need to do spidertrax with this setup? with more backspacing the inside of the wheel will be closer to the UCA and calipers right?

 

Humm I thought the FJ rims were 4.5" BS

 

I dunno maybe he measured wrong he told me 6 tho which seems a little off right?

 

its the 16in wheel too not the 17

 

I think the FJ trds are 4.5" and the regular FJ wheels are 5.5" but I'm not positive.

 

so then I should be alright. is there any chance of them rubbing on the calipers or uca? but if it does spacers can fix that

 

this is the style I was looking at, 2008 16in

 

and will my tpms work in these wheels if I just swap them in?

 

Should be good to go with those. For the tpms, if you have alloys already, then they should swap over.

 

just double checking before I buy them I've checked other places and they say 4.5 bs just wondering if anyone on here is running these so they can tell me for sure