Got a chance to pick up a set of 15" factory steel wheels from a 2001 Jeep Wrangler. Specs on the wheels seem to be in line with my 2000 2WD Tacoma 5 lug wheels.
Jeep is 5x114.3 with 32 offset and 71.6 center bore. Taco is 5x114.3, high positive offset and 67.1 center bore.
My question......will the larger center bore of the Jeep wheels present any problems. I know a smaller center bore would prevent them from fitting on the hubs but not sure if there are any down sides for a larger center bore.
Are the Tacoma wheels hub centric or lug centric. Does it really matter?
Thanks for any advice or thoughts on this. I already screwed up on a set of 15" alloy wheels from a 2004 Honda CRV....center bore of 64.1 was to small. Good deal on the CRV wheels if anyone is looking!