Will Pro-Comp steelies fit?

Whats up Tacoma world,

I went to my local truck shop, Eastern Off-Road in Norfolk, VA, and was getting a quote on parts and labor for a 3'' lift new wheels and tires.

I told the salesman I would like to get Pro Comp RC series 52 Steelies, and he told me they wouldn't fit.

I find that a little hard to believe, because i have 17'' sport wheels, and if I buy 17'' steelies i don't see why they wont fit.

Here's a link to the ones I want.
http://www.4wheelparts.com/Wheels/5...s=209&t_pt=100021&t_pl=100347&t_pn=PCW52-7883

So if any of you guys are running steelies or could help answer my question, I'd appreciate it.[/FONT]

 

Wait they will fit I thought you were getting 16 in rims

 

Some of the steel wheels have issues clearing the brake calipers. The height is correct but the way the wheel is made from the mounting surface to the outter section of rim, can interfere on some models of the procomp steel wheels.

 

thanks for the help guys, i think im going to go to eastern and see if they will let me fit test a wheel.

and if any body on here has steelies on ther truck, post some pics.

 

The "D" windows are flared on the backside for strength and will contact the caliper. I'm pretty sure you would have to get a 17" 52 series and run wheel spacers to clear the caliper. You could grind the caliper where the wheel contacts, but I don't recommend it.

 

http://www.tacomaworld.com/forum/suspension/191138-bilstein-5100s-1-75-stock-rear-suspension.html

^this guy is running Pro Comp 52 series 17" with 1.25" Spidertrax wheel spacers.

 

I can not remember what series they are but the round hole procomps clear like a champ.

 

http://www.4wheelparts.com/Wheels/R...k.aspx?t_c=11&t_s=209&t_pt=100021&t_pl=101921

these?

 

i have those rims and love them! You should get center caps some say they look good without them, they don't. but they are great steelies i had them put on with my 3" rough country lift.