correct rim size/bolt pattern help

hey guys, whats up? ive been a lurker for a while and finally decided to make an account haha. TW!

quick question: ive been looking at some rims for my taco, but i dont know which is the correct size/bolt pattern. If anyone here has seen BeachBoy's MGM taco... thats the look im trying to go for. hopefully you guys can chim in on this. i plan on running 285's with these rims.

link(bottem 2 rows with the 17x8.5 Teflon American Racing Predator):
http://eliteswheels.com/main/results?sort_by=&sort_by=&q= teflon &pro_name=Y&x=0&y=0&page=4

 

Welcome to TW. The bolt pattern you need is 6 on 5.5, or 6 on 139.7, same thing.

These are the ones you need. They have the proper backspacing and b bore for our trucks.
http://eliteswheels.com/main/product_detail/17155

 

Thanks KPT. I appreciate the help! I've been reading a bit through the forums and i read something that said certain backspacing measurements could rub against the cab mount along with tire size and might require some the mod for it. do you happen to know what is the max backspacing a rim could have? i also plan on running those rims with procomps mud terrains (http://www.4wheelparts.com/Tires/LT...3&t_s=157&t_pt=100810&t_pl=5379&t_pn=PCT67285). i know lots of trimming on the plastics are a necessity but do you think id need to do the cab mount mod?

 

Do you have a lift?

4.5" backspacing is best for the least amount of rubbing with 285s. You will definately have to trim as you stated. Cab mount chop is hit or miss.

 

i dont have everything installed yet, but i plan on running fox 2.5 coil overs. just debating between the remote reservoirs or not. TC UCA's, and bilstein 5100 in the rear with icon 1.5" AAL.

i guess well have to find out about the cab mount when i get all this put together!

you have an awesome build! sweet setup man!

 

How about these?

http://www.ebay.com/itm/110731070215?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

 

those are some sick rims!! i want to go with set that aren't very popular and are uncommon. i see way to many tacos running the same rims so i wanted to get something a little different. also 17" would be ideal.

 

How bout dees http://www.tacomaworld.com/forum/wheels-tires-marketplace/238505-scs-stealth-6-wheels-17x8-5-a.html

 

those are some good choices as well, but ive had my eye on the predators for a while. might have to start a poll between all these good choices. you should run em on your taco.

 

Lol i will be very soon. The predators are pretty sick, real tough looking.

 

I like em because they are inexpensive and just look good with the black fender flares. but thats just me

 

looks like you should pick up a set! haha. yeah the atx rims i plan on getting are around $700 so its fairly affordable, which is a good thing

 

Those will not clear the front calipers.

 

just found the same rims but 17 inch

 

It's not about the diameter, it's about the spoke and backside design. the only steel wheels that clear the calipers are wheelers steelies.

 

DAMNIT
I will keep looking I just dont have alot of Cash to do what I want

 

If you can find them, and for cheap, go with some KMC XD Enduros

http://www.summitracing.com/parts/kmd-12268060700/overview/

I know they are only 16's, but they aren't too expensive, and not too many people(that I've seen) are running them. I haven't done a ton of research, but you might be able to find them in 17's in 6x5.5 somewhere else online.