Wheel upgrade 07 Tacoma Reg Cab 2WD

I want to upgrade the steel wheels/tires on my truck. I found some Toyota OEM wheels on Ebay which I like. I emailed the seller and asked for the bolt pattern and offset and he did not have the information. Is anyone familiar with these wheels and would know the offset/bolt pattern. Thanks


http://cgi.ebay.com/ebaymotors/NEW-...ViewItem?hash=item8027401821#ebayphotohosting

 

I think that this is only for one wheel.

Anyway my truck is an 07 V6 ext cab and it uses a 6 x 5.5. Ie. 6 lugs, this wheel has 5. Dont know about your truck though.

 

I am going to agree with reid and say that this auction is for one wheel. Therefor to buy all four that the seller has listed is going to run you $620 plus what looks to be about $46.00 shipping. And there is not way in hell that oem camry wheels are worth $660 to your door.

Second they MAY fit if you have a base 4x2 tacoma with the 5 lug hubs (I don't know the bolt spacing on the 5 lug trucks or on the camry so I can't be sure) But the 4x4 trucks and pre-runners all use a 6 lug hub, so they are not an option if that's what you have.

just my $0.02

 

Thank you for your responses.

I have 5 lugs, but I read a post on CustomTacos.com that Camry wheels have a center bore of 60.1 and the center bore on a 2WD Tacoma is 67.1 so the wheels would have to be bored out in order for them to fit, so not worth the extra work to me.....

 

definately not worth boring them out. The time it would take for a machine shop to put them on a lathe and bore ou the inside Diameter would cost you pretty much the price of the rims.

 

You read wrong. The bore on '04 and earlier is 67.1.
'05 and up is 60.1. Let me know how the camry wheels fit.
I've been thinking about trying to find some from Camry or Sienna.
I want some 16" with TPMS sensors still installed.

 

spp- I got that information from customtacos 2WD Tacoma forum, but you are you saying the 07 2WD Tacoma wheel bore is 60.1 ?

 

I also got My info from Custom Tacos. You misread the post there.

 

2WD / 5-LUG INFO: Basic Tacoma Wheel Info

--------------------------------------------------------------------------------

2WD 5-lug Tacoma wheels have the following basic parameters:

Bolt pattern / bolt circle / PCD: 5 X 114.3 (mm) = 5 X 4.5"

Lug Nut Thread Format: M12 (12 mm) X 1.5

Centerbore:

1995.5 - 2004: 67.1 mm
2005 - ???? : 60.1 mm


Tacoma OEM / factory 2WD wheels have been sized as follows:

1996 - 1997:

Wheel Size: 14 in. (2WD)
Type & Material: Steel

1998 - 2000:

Wheel Size: 14x5,14x6 (2WD)
Type & Material: Steel, Alloy

2001 - 2004:

Wheel Size: 15x6 (2WD non-SR), 16X6.5(S-Runner)
Type & Material: Chrome, Steel, Alloy

2005:

Wheel Size: 15" (2WD non-XR), 18" (X-Runner)
Type & Material: Steel, Alloy

--------------------------------------------------------------------------------
Last edited by Enola Gaia : 11-04-2006 at 09:37 AM.

 

spp- thanks for the updated info, makes it a lot easier now

 

Post pictures of whatever you get so I can decide too please.

 

Will do, apparently the offset on the camry wheels is 50, but that should still work....will post photos when i finish....

 

SPP
I have new 31x10.5x15 tires from 99 v6trd that is to be crushed. Would like to use the tires on new 08 2wd 2.7 basic access tacoma. Would tires fit with stock rims? THanks.

 

I think the rims would be too narrow for that size tire and they would rub without a lift.