17x9 with 5" BS/0 offset. work on stock suspension?

Looking to pick up some XD Eduros's. They are used but in great condition, but I also don't know the exact specs on them. I looked online and it looks like they are either 4.5" or 5" backspacing w/ 0 offset.

Right now I have stock suspension with 265/70 r17s. Will this work out? the tires will fit a 9" rim

 

What year is your truck?

 

2012 4x4 DCSB TRD sport

I guess the wheels are actually -6 offset and 4.7" BS.....

 

I suspect you'll rub a bit without a bit of lift. I have 17x9 wheels with 4.5 BS and 265/70-17 Duratrac's with roughly 2.8" of lift up front, and I rub a tad in reverse at full lock.

 

I can live with a little rub. I plan on going with a 2-3" lift anyway.

I found a guy that has 17x9 XD Enduros in new condition.

 

I'd put a lift on prior to doing the wheels just to be safe. When I bought my truck I had the stock TRD Sport wheels with 265/70-17 Bridgestone Revo's, and even then I rubbed a tad. With 17x9 wheels with 4.5 BS the outer edge of the wheel is roughly 2.5" further out in the wheel well, so I almost guarantee it'll rub, and probably worse than what mine does.

 

As long as you can deal with some rubbing, you'll be ok. The main concern is that you're not going to run on your UCA. Full lock rubbing happens on most setups. Just do some plastic trimming, mud flap removal, and you'll be fine for street driving.

 

I can deal with some light rubbing/trimming. I'll probably throw a small lift/leveling kit in soon too so that should help! So just to clarify, 4.7" BS w/ a -6 offset will NOT hit the UCA...

 

Correct.