Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Garage > Wheels & Tires

Notices

Wheel spec question

Reply
 
* Tire Finding Tools Thread Tools Search this Thread
Old 05-17-2013, 11:09 AM   #1
Corn [OP] Corn is offline
Junior Member
Corn is on a distinguished road
 
Corn's Avatar
Joined: Jan 2011, #49542
Gender: Male
Posts: 28
Corn's Tacoma Gallery
Wheel spec question

Sorry guys if this has been covered in previous threads, but specifically, I need to know how much these wheels:

http://www.summitracing.com/parts/br...6040/overview/

--would stick out, compared to the stock wheels. This wheel in question has a 4" back space and -12.00 offset. Trying to understand this is all new to me. I have looked at the diagrams in other threads, but would like to compare to the stock.

Running 2000 Tacoma, 4x4 3.4L with the stock 15" alloy wheels.

I'm not necessarily going to get this wheel, but I'd like to know for future reference. I can tolerate them sticking out about an inch, but don't want anything extreme.

Anything else I need to be aware of when replacing wheels for the 2000 Tacoma?

Thanks
  Reply With Quote
Old 05-18-2013, 11:59 AM   #2
Truck ~n~ Tow
TacoDell is one of the sharper tools in the shedTacoDell is one of the sharper tools in the shedTacoDell is one of the sharper tools in the shedTacoDell is one of the sharper tools in the shedTacoDell is one of the sharper tools in the shedTacoDell is one of the sharper tools in the shedTacoDell is one of the sharper tools in the shedTacoDell is one of the sharper tools in the shedTacoDell is one of the sharper tools in the shedTacoDell is one of the sharper tools in the shedTacoDell is one of the sharper tools in the shed
 
TacoDell's Avatar
Navy: BU3....   Builder with NMCB3 1981-1986...  SeaBee's if that's easier...
Joined: Jun 2008, #7448
Location: Hemet/SoCal
Gender: Male
Posts: 873
TacoDell's Tacoma Gallery
don't know that I have stk wheel pics...
But I'll throw up some other 8" wheel width mountings.

Here are IS wheels (Ivan Stewart) 16 X 8 @ 4.5" BS (oem)
These had 265/75/16 tires mounted to them.

^ Nominally measured... these are about 31.8/10.50/16

* a 10.50" tire width is about max utilizing the oem 4.5" BS'ing




and here is a pic of 16 X 8 ProComp steelies @ 4" BS (Wheeler's type "B")
These had 285/75/16 tires mounted.

^ Nominally measured... these are about 33.1/11.50/16




Next step up...
ProComp 8069-6883 alloys 16 X 8 + 4" BS + -11mm off set
These wheels are sporting 295/75/16 tires...

^ Nominally measured... these are about 33.6/11.65/16


~not only taller... these are about .25" wider then a 285~





Why 15" wheels ?

Are you running fender flares ?

Might help to know what tire size you intend to run !?
  Reply With Quote
Old 05-25-2013, 09:55 PM   #3
Corn [OP] Corn is offline
Junior Member
Corn is on a distinguished road
 
Corn's Avatar
Joined: Jan 2011, #49542
Gender: Male
Posts: 28
Corn's Tacoma Gallery
That's helpful. Thanks for the images. I really like the front assembly you've got. Why 15"? Timing mainly. I have brand new tires, but it's time for some new wheels. Then, budget is another issue.
  Reply With Quote
Old 05-25-2013, 10:01 PM   #4
Corn [OP] Corn is offline
Junior Member
Corn is on a distinguished road
 
Corn's Avatar
Joined: Jan 2011, #49542
Gender: Male
Posts: 28
Corn's Tacoma Gallery
Would you think the bolt pattern for a 2000 Tacoma be 6 x 5.5? or 6 x 4.5?
  Reply With Quote
Old 05-25-2013, 10:46 PM   #6
Senior Member
Rich91710 is one of the sharper tools in the shedRich91710 is one of the sharper tools in the shedRich91710 is one of the sharper tools in the shedRich91710 is one of the sharper tools in the shedRich91710 is one of the sharper tools in the shedRich91710 is one of the sharper tools in the shedRich91710 is one of the sharper tools in the shedRich91710 is one of the sharper tools in the shedRich91710 is one of the sharper tools in the shedRich91710 is one of the sharper tools in the shedRich91710 is one of the sharper tools in the shed
 
Rich91710's Avatar
Name: Rich
Joined: Feb 2012, #73470
Location: Los Angeles
Gender: Male
Posts: 16,537
Rich91710's Tacoma Gallery
Quote:
Originally Posted by Corn View Post
Would you think the bolt pattern for a 2000 Tacoma be 6 x 5.5? or 6 x 4.5?
Same as 2nd Gen. 6 x 5.5 (actually 139mm)
  Reply With Quote
Old 06-15-2013, 02:29 PM   #7
Corn [OP] Corn is offline
Junior Member
Corn is on a distinguished road
 
Corn's Avatar
Joined: Jan 2011, #49542
Gender: Male
Posts: 28
Corn's Tacoma Gallery
Sorry to bother you again with this question. I'll eventually be asking the tire dealer about it as well.

I've found these wheels:
http://rimzoneonline.com/15x8-mickey...000000524.html

Given the BS, should they stick out a lot?
  Reply With Quote
Old 06-15-2013, 03:19 PM   #8
Junior Member
Kornholio is on a distinguished road
 
Kornholio's Avatar
Joined: May 2013, #103571
Location: Hawaii
Gender: Male
Posts: 17
Kornholio's Tacoma Gallery
I have XD Addicts, -12mm offset and 4.5 backspace and they stick out of my wheel well about 3/4". I have 275 width tires aswell. Im sure 265 or 255 would stick out less then that
  Reply With Quote
Old 10-15-2013, 05:19 PM   #9
Senior Member
Mainmoe02 is one of the sharper tools in the shedMainmoe02 is one of the sharper tools in the shedMainmoe02 is one of the sharper tools in the shedMainmoe02 is one of the sharper tools in the shedMainmoe02 is one of the sharper tools in the shedMainmoe02 is one of the sharper tools in the shedMainmoe02 is one of the sharper tools in the shedMainmoe02 is one of the sharper tools in the shedMainmoe02 is one of the sharper tools in the shedMainmoe02 is one of the sharper tools in the shedMainmoe02 is one of the sharper tools in the shed
 
Mainmoe02's Avatar
Name: Moe
Joined: Apr 2013, #103047
Location: Austin, Texas
Age: 30
Gender: Male
Posts: 1,971
Mainmoe02's Tacoma Gallery
Quote:
Originally Posted by TacoDell View Post
don't know that I have stk wheel pics...
But I'll throw up some other 8" wheel width mountings.

Here are IS wheels (Ivan Stewart) 16 X 8 @ 4.5" BS (oem)
These had 265/75/16 tires mounted to them.

^ Nominally measured... these are about 31.8/10.50/16

* a 10.50" tire width is about max utilizing the oem 4.5" BS'ing




and here is a pic of 16 X 8 ProComp steelies @ 4" BS (Wheeler's type "B")
These had 285/75/16 tires mounted.

^ Nominally measured... these are about 33.1/11.50/16




Next step up...
ProComp 8069-6883 alloys 16 X 8 + 4" BS + -11mm off set
These wheels are sporting 295/75/16 tires...

^ Nominally measured... these are about 33.6/11.65/16


~not only taller... these are about .25" wider then a 285~





Why 15" wheels ?

Are you running fender flares ?

Might help to know what tire size you intend to run !?
Hey TacoDell I'm looking to get the 295/75/16 Dynapro MT's but I'm worried about not getting the properly spec'd wheels in order to fit them.

How much space between the coil spring/ UCA and tire was there with the 4" BS and -11 offset on the 16x8 wheels?

I'm wondering if 4.5" BS would work with a 16x8 wheel and the 295 Dynapro MT
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Shell Spec Question? Please Help tahoetacoma 2nd Gen. Tacomas 10 08-14-2012 09:20 PM
Need guidance on what wheel spec I need for My lift and bigger tires. TODEOTA Wheels & Tires 5 07-11-2012 05:35 PM
usa spec pa-12toy question Koov Audio & Video 6 04-07-2010 08:51 PM
Help me out with some wheel ID and Spec info. A.D. Wheels & Tires 5 06-10-2009 08:17 AM
USA Spec Ipod Question Khaos Audio & Video 3 05-27-2008 06:32 PM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.