Anyone running 275 65 18 with stock suspension or bilstein in front?

I currently have 285 60 18 terra grapplers on 18x8.5 xd spy's with +18 offset on my 06 Tacoma with stock suspension (non tsb). I had no rubbing anywhere and wanted to know if anyone ran 275 65 18 tires with stock suspension or just having a little lift in the front. I would like to get the taller tires and use bilsteins in the front set on .85 if needed or just keep the stock suspension. The only thing is I don't want to rub especially rub the UCA. If anyone has pics of this set up it would be great. Thanks

 

I was running 275 65 18s on bilstines set on the middle ring (think 1.5?) and just had to do some trimming with a box cutter and a little trimming on the bumper with a dremil. Didn't have any issues and did take it offroad quite a bit with that setup with no issues.

 

Thanks...do you know what offset your wheels were?

 

Sadly I can't remember. Long story short my truck should be back in a week or so and I'm going to a smaller wheel and can measure than. But no help for you tonight

 

It's fine thanks

 

Is there anyone that has pics of this setup?

 

look in my gallery, i have some on page 6 or 7